Skip to content

Gears and drivetrain 5.15

Chain length on a double

On a bike with two chainrings at the front, the chain has to reach round the biggest ring and the biggest cog without ripping the mech off, and still be tight enough in the small gears. There's a simple method that gets it right on almost every bike.

Get the printable PDF
+ 2 LINKS: ONE INNER, ONE OUTERBiggest ring and biggest cog, round both but not through the mech. Then add two links.BIG RINGBIGGEST COGTRAVERSCanewdon, Essextraversbikes.comCHAIN LENGTH ON A DOUBLEGUIDE 5.15 · SIZES IN MM · NOT TO SCALE
Wrap the chain round the big ring and the biggest cog, not through the mech, then add two links.

The three checks

BIG-BIG: NOT THROUGH THE MECH

Big ring, big cog

Wrap it round both, not through the derailleur. Where the ends meet, add two links.

SMALL-SMALL: CHAIN MUST NOT TOUCH

Small ring, small cog

Shift into it. The chain mustn't touch itself under the mech. You shouldn't ride in it anyway.

CAGE NOTSTRETCHEDFLAT

The mech cage

In big-big the cage shouldn't be stretched flat. If it is, the chain is too short.

Sizing it

  1. Shift to the big ring and the biggest cog. Take the chain off the mech's pulleys.
  2. Wrap the chain round both and pull it snug. Find where the ends would join.
  3. Add two links: one inner and one outer. Mark it, cut it, and join it with the chain's quick link or pin.
  4. Route it through the mech and check big-big and small-small. Then check your mech's own manual: some differ.

Too long or too short

Too shortToo long
Mech cage stretched flat in big-bigChain slaps and drops off
Can rip the mech off if you shift into big-bigChain touches itself in small-small
Hard, slow shifting to the big cogSloppy shifting at the front

Using the old chain

IfThen
The old one was rightMatch link for link
Not sureUse the method

Lay them side by side and count links, not length: the old one has stretched.

Tools

  • Chain tool
  • Quick link pliers
  • Something to mark the link

Things that catch people out

  • Count links, not centimetres. A worn chain is longer than a new one with the same number of links.
  • Full suspension bikes need checking with the shock let down, where the chain is pulled furthest.
  • Some groupsets have their own method. Shimano's newer road and gravel groups, for example. Their manual comes first.
  • Cut on the right side of the link so you end with two inner links to join with a quick link.

From the workshop

If you're replacing a chain that shifted well, matching the old one link for link is quickest. If you've changed the cassette size or chainrings, size it fresh with this method.

Michael

Book it in

Chains in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against makers' chain length instructions.

BookMy Shed