Skip to content

Gears and drivetrain 5.03

Chains explained

Every chain has the same 12.7 mm pitch, but they get narrower as the gears go up. A chain has to match how many gears you have, and a few systems only work with their own chain. Here's how to choose one, join it and get the length right.

Get the printable PDF
SIDE VIEW12.7 PITCHFROM ABOVEINNEROUTEROUTER PLATEROLLERturns on the bushINNER PLATEPINjoins one link to the nextTRAVERSCanewdon, Essextraversbikes.comCHAINS EXPLAINEDGUIDE 5.03 · SIZES IN MM · NOT TO SCALE
A chain from the side and from above. The pitch never changes; the width does. Drawing not to scale.

Joining and sizing

QUICK LINKSLOTS, NO TOOL TO OPEN

Quick link

Two half links that lock as the chain pulls tight. Most 11 and 12-speed links are made to be used once.

JOINING PIN: SNAP THE GUIDE OFF

Joining pin

Shimano's way: a special pin pushed in with a chain tool, then the guide end snapped off. Never reuse one.

BIGBIGBIG RING, BIG COG, PLUS 2 LINKS

Length

Round the biggest ring and biggest cog, not through the mech, then add two links. Some systems differ.

Which chain do I need?

  1. Count your gears at the back. Eleven cogs need an 11-speed chain. Look it up in your bike's original spec if you're not sure.
  2. Check for a system of its own. SRAM T-Type (Transmission), SRAM Flattop road and Shimano Linkglide each need their own chain.
  3. Choose how you'll join it. A quick link, or a joining pin on some Shimano chains. If you'll take it off to wax it, a reusable link like a Connex is easier.
  4. Size it before you cut it. Use the old chain if it was right, or the method below. Always count links, not centimetres.

Chain widths by speed

SpeedsOuter width (approx.)Inner widthNotes
6, 7, 87.1 to 7.3 mm2.38 mm (3/32")Shared across the three
96.6 mm2.18 mm
105.9 mm2.18 mmCampagnolo 10 a little wider
115.5 mm2.18 mm
125.2 to 5.3 mm2.18 mmSRAM Eagle, Shimano 12, Campagnolo
T-Type, Flattop, Linkglideown shapeOnly fits its own system

Widths vary a little between makers. All chains have a 12.7 mm (1/2") pitch.

When to replace

ChainReplace at
11 and 12-speed0.5%
6 to 10-speed0.75%

Measured with a chain checker. See guide 10.05.

Tools

  • Chain tool
  • Quick link pliers
  • Chain checker
  • Rag and degreaser

Things that catch people out

  • A wider chain won't run on a narrower cassette, and it rubs the next cog. Match the speed.
  • Most 11 and 12-speed quick links are single use. Fit a new one each time you take the chain off, or use a reusable link.
  • Too short can rip the mech off in the biggest gear. Too long and it slaps and drops off.
  • Full suspension bikes need sizing at full squash, with the shock air out, where the chain is pulled longest.

From the workshop

A new chain every so often is the cheapest thing you can do for your drivetrain. Leave it too long and it wears out the cassette and chainrings with it. All my chains come plain or hot-waxed, ready to fit.

Michael

Book it in

Chains in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against makers' chain specs, Park Tool and Sheldon Brown.

BookMy Shed