Bespoke titanium frames
Design your own frame
Pick a frame, change what you like and watch the drawing change to scale. When it looks right, send it to me. I check every design myself before I quote, and if something won't ride well, I'll tell you. How bespoke frames work · What to measure
Watch the two minute tour
Not sure where to start? Pick an idea, then change anything you like.
£2,199 inc VAT, free UK delivery · standard
SendSend the standard frameSettings
Size shown: Large. Move a setting and the drawing changes; the wheels stay on the ground. The faint dashed frame is the standard.
Standard 455.5mm, range 410.5 to 500.5.
Standard 633mm.
Standard 619.1mm, range 574.1 to 664.1.
Standard 109.9mm.
Standard 470mm, range 390 to 530.
- Wheelbase
- 1150 mm
- Trail
- 101 mm
- BB height
- 307 mm
- Standover (about)
- 771 mm
- Seatpost to bars (horizontal)
- 713 mm
- Reach to the bar clamp
- 535 mm
- Bar clamp height
- 995 mm
- Rear tyre to seat tube
- 12.6 mm
- Front tyre to down tube
- 89 mm
- Front tyre to fork crown
- 138 mm
- Heel clearance
- 9.9 mm
- Largest chainring that fits
- 36 teeth
- Front centre
- 722 mm
- Wheels
- 29" x 2.4" (740 mm)
These drawings and warnings are a guide only. I check every design and confirm the final measurements and fit with you before anything is built.
How accurate is this?
The drawing uses the actual tube sizes and tyre, so tight gaps show up. I check the heel and chainring clearances again when I go through your design. Standover is approximate. The stem, bars and saddle are shown to help you see your reach.
Save and share
Your design is saved in the link, so you can come back to it, send it to a friend, or post it. I don't store anything unless you ask for the reminder below.