Gears and drivetrain 5.15
Chain length on a double
On a bike with two chainrings at the front, the chain has to reach round the biggest ring and the biggest cog without ripping the mech off, and still be tight enough in the small gears. There's a simple method that gets it right on almost every bike.
Get the printable PDFThe three checks
Big ring, big cog
Wrap it round both, not through the derailleur. Where the ends meet, add two links.
Small ring, small cog
Shift into it. The chain mustn't touch itself under the mech. You shouldn't ride in it anyway.
The mech cage
In big-big the cage shouldn't be stretched flat. If it is, the chain is too short.
Sizing it
- Shift to the big ring and the biggest cog. Take the chain off the mech's pulleys.
- Wrap the chain round both and pull it snug. Find where the ends would join.
- Add two links: one inner and one outer. Mark it, cut it, and join it with the chain's quick link or pin.
- Route it through the mech and check big-big and small-small. Then check your mech's own manual: some differ.
Too long or too short
| Too short | Too long |
|---|---|
| Mech cage stretched flat in big-big | Chain slaps and drops off |
| Can rip the mech off if you shift into big-big | Chain touches itself in small-small |
| Hard, slow shifting to the big cog | Sloppy shifting at the front |
Using the old chain
| If | Then |
|---|---|
| The old one was right | Match link for link |
| Not sure | Use the method |
Lay them side by side and count links, not length: the old one has stretched.
Tools
- Chain tool
- Quick link pliers
- Something to mark the link
Things that catch people out
- Count links, not centimetres. A worn chain is longer than a new one with the same number of links.
- Full suspension bikes need checking with the shock let down, where the chain is pulled furthest.
- Some groupsets have their own method. Shimano's newer road and gravel groups, for example. Their manual comes first.
- Cut on the right side of the link so you end with two inner links to join with a quick link.
From the workshop
If you're replacing a chain that shifted well, matching the old one link for link is quickest. If you've changed the cassette size or chainrings, size it fresh with this method.
Michael
Book it inChains in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against makers' chain length instructions.



