Skip to content

Gears and drivetrain 5.13

Anatomy of a chain

A chain looks simple, but it's a few hundred small parts working together. Knowing what each one does makes sense of everything else: why chains wear, why wax works, why some links are single use, and why the gears shift where they do.

Get the printable PDF
PUT TOGETHER12.7 PITCHTAKEN APART123431NO. PART1Outer platesriveted to the pins2Pinsjoin one link to the next3Inner platesthe bush is pressed into them4Rollersturn on the bush, meet the teethTRAVERSCanewdon, Essextraversbikes.comANATOMY OF A CHAINGUIDE 5.13 · SIZES IN MM · NOT TO SCALE
A chain put together, and one outer and one inner link taken apart. Drawing not to scale.

Details worth knowing

QUICK LINK: AN OUTER LINK

The quick link

A quick link is just an outer link that comes apart by hand. It always joins two inner links.

SHAPED PLATES HELP SHIFTING

Shaped plates

Modern plates are chamfered and cut away so the chain climbs onto the next cog quickly.

SOME RUN ONE WAY ROUND

Direction

Some chains have to go on one way round. Check for an arrow or writing that faces out.

How it works

  1. Outer and inner links take turns. That's why a chain has to be joined inner to inner, with an outer link or a quick link.
  2. Each roller turns on its bush as it meets a tooth, so the chain rolls on and off rather than sliding.
  3. The pin turns inside the bush every time the link bends round a cog. That's where wear happens.
  4. So keep the inside clean. Dirt between the pin and bush grinds them away. Wax keeps it out.

The parts

PartWhat it doesWears by
Outer platesHold the pins, joining the linksHardly at all
Inner platesHold the bush the roller turns onHardly at all
PinsJoin one link to the nextRubbing inside the bush
BushPart of the inner plate on modern chainsRubbing on the pin
RollersMeet the teeth and turnSlowly, on the outside

Pin and bush wear is what makes a chain grow longer. See guide 5.04.

Every chain

SizeIs
Pitch12.7 mm (1/2")
Links in a new chainabout 110 to 126

Tools

  • Chain tool
  • Quick link pliers
  • Chain checker

Things that catch people out

  • You can't join two outer links. Shorten by a whole link (one inner and one outer), unless it's a half-link chain.
  • Never push a pin all the way out on a modern chain to rejoin it. Use a quick link or a new joining pin.
  • Single-use quick links are made to be fitted once. Reusing them can let them pull apart.
  • The outside of a chain can look fine while the pins inside are worn out. Measure, don't judge by eye.

From the workshop

Once you know the wear is inside, between the pin and the bush, it's easy to see why wax makes chains last so much longer: it fills that gap so dirt can't get in. Wet lube does the opposite.

Michael

Book it in

Chains in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against makers' chain specs.

BookMy Shed