Care and checks 10.05
Wear limits
Parts wear out slowly, so it's easy to miss until something slips, squeals or fails. This is a straightforward guide to help lift the mystery: how to check each part, the numbers to replace them at, and why changing a chain on time saves money.
Get the printable PDFThree quick checks
Chain
A chain checker drops in when the chain has worn past the limit.
Brake pads
Shine a torch in the caliper and compare the pad with the limit for your brake.
Rotor
Measure the thickness with callipers. The limit is often printed on the rotor.
Check your bike
- Check the chain with a chain checker every few weeks of regular riding. It takes ten seconds.
- Look at the brake pads with a torch. Check the limit for your brake over the page.
- Measure the rotors with callipers if the brakes feel weak or the rotor edge has a lip.
- Run your hand round the tyres. Look for cuts, bulges, threads showing, and tread worn flat.
Wear limits
| Part | Replace at | How to check |
|---|---|---|
| Chain, 11 and 12-speed | 0.5% | Chain checker |
| Chain, 5 to 10-speed | 0.75% | Chain checker |
| Chain, singlespeed | 1% | Chain checker |
| Brake pads, Shimano | 0.5 mm | Pad material only |
| Brake pads, SRAM | 3 mm | Pad and backing plate |
| Brake pads, Magura | 2.5 mm | Pad and backing plate |
| Rotors | about 1.5 mm | Callipers. Check the figure on the rotor |
Signs it's already gone
| Sign | Usually means |
|---|---|
| New chain skips | Worn cassette |
| Chain drops off rings | Worn chainrings |
| Squeal and weak brakes | Worn or dirty pads |
| Lots of punctures | Worn tyre |
Tools
- Chain checker
- Vernier or digital callipers
- Torch
- Track pump with a gauge
Things that catch people out
- Change the chain on time and the cassette lasts. Leave it and the chain wears the cassette and chainrings too.
- A new chain on a worn cassette will skip. If it does, the cassette needs replacing as well.
- Pad limits are measured differently. Shimano counts pad material only. SRAM and Magura count the backing plate too.
- Rotors wear on both faces. A lip at the outer edge is a sign of wear.
- Tyre wear isn't only tread. Cuts, bulges and threads showing mean replace it now.
From the workshop
A chain checker is the cheapest tool you'll ever buy for your bike. Check every few weeks and change the chain on time, and you'll get two or three chains out of a cassette instead of one. Or bring it in and we'll check it for you.
Michael
Book it inChains in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Park Tool's chain wear limits, Sheldon Brown, and Shimano, SRAM and Magura pad limits.



