Skip to content

Care and checks 10.05

Wear limits

Parts wear out slowly, so it's easy to miss until something slips, squeals or fails. This is a straightforward guide to help lift the mystery: how to check each part, the numbers to replace them at, and why changing a chain on time saves money.

Get the printable PDF
0.5 / 0.75 Drops right in?the chain is past the limit Chain checkerhooks over a roller Chains wear and lengthen. A worn chain wears out the cassette and chainrings with it.
A chain checker on a chain. Drawing not to scale.

Three quick checks

Chain

A chain checker drops in when the chain has worn past the limit.

wornnew

Brake pads

Shine a torch in the caliper and compare the pad with the limit for your brake.

1.5 mm?

Rotor

Measure the thickness with callipers. The limit is often printed on the rotor.

Check your bike

  1. Check the chain with a chain checker every few weeks of regular riding. It takes ten seconds.
  2. Look at the brake pads with a torch. Check the limit for your brake over the page.
  3. Measure the rotors with callipers if the brakes feel weak or the rotor edge has a lip.
  4. Run your hand round the tyres. Look for cuts, bulges, threads showing, and tread worn flat.

Wear limits

PartReplace atHow to check
Chain, 11 and 12-speed0.5%Chain checker
Chain, 5 to 10-speed0.75%Chain checker
Chain, singlespeed1%Chain checker
Brake pads, Shimano0.5 mmPad material only
Brake pads, SRAM3 mmPad and backing plate
Brake pads, Magura2.5 mmPad and backing plate
Rotorsabout 1.5 mmCallipers. Check the figure on the rotor

Signs it's already gone

SignUsually means
New chain skipsWorn cassette
Chain drops off ringsWorn chainrings
Squeal and weak brakesWorn or dirty pads
Lots of puncturesWorn tyre

Tools

  • Chain checker
  • Vernier or digital callipers
  • Torch
  • Track pump with a gauge

Things that catch people out

  • Change the chain on time and the cassette lasts. Leave it and the chain wears the cassette and chainrings too.
  • A new chain on a worn cassette will skip. If it does, the cassette needs replacing as well.
  • Pad limits are measured differently. Shimano counts pad material only. SRAM and Magura count the backing plate too.
  • Rotors wear on both faces. A lip at the outer edge is a sign of wear.
  • Tyre wear isn't only tread. Cuts, bulges and threads showing mean replace it now.

From the workshop

A chain checker is the cheapest tool you'll ever buy for your bike. Check every few weeks and change the chain on time, and you'll get two or three chains out of a cassette instead of one. Or bring it in and we'll check it for you.

Michael

Book it in

Chains in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Park Tool's chain wear limits, Sheldon Brown, and Shimano, SRAM and Magura pad limits.

BookMy Shed