Skip to content

Care and checks 10.04

Waxing a chain

Hot waxing soaks the chain in melted wax so it sets hard inside the rollers. Done right, the chain runs clean and quiet and lasts far longer. This guide uses Squirt Performance Hot Wax, the wax I use in the workshop, and Squirt's own temperatures.

Get the printable PDF
93 TO 95 °Cnever over 10012341 STRIP ITSilca Chain Stripper, rinse2 MELT THE WAXin a slow cooker3 DIP 3 TO 5 MINswish it, heat off4 HANG 20 MINthen flex it looseTRAVERSCanewdon, Essextraversbikes.comWAXING A CHAINGUIDE 10.04 · SQUIRT HOT WAX
Strip, melt, dip, hang. Squirt's own temperatures. Drawing not to scale.

The three stages

SILCA CHAIN STRIPPER

Strip it

Silca Chain Stripper takes the factory grease and old lube off. Soak, shake, then rinse in hot water.

3 TO 5 MINUTES

Dip it

Into wax at 93 to 95°C, heat off, swished about for 3 to 5 minutes so it gets into every roller.

20 MIN

Hang it

Hook it out and hang it for about 20 minutes. When it's cold, flex every link until it moves freely.

Waxing, start to finish

  1. Get the chain off. A reusable quick link makes this a 10 second job every time.
  2. Strip it with Silca Chain Stripper. Shake the chain in it for 30 seconds, leave it 5 to 10 minutes, shake again, then rinse in hot water and let it dry.
  3. Melt the wax in a slow cooker kept for the job, to 93 to 95°C. Squirt say 85 to 95°C works and never go over 100°C.
  4. Dip, swish, hang, flex. 3 to 5 minutes in the wax with the heat off, 20 minutes to cool, then flex each link and fit it.

Squirt Performance Hot Wax, the numbers

StepSquirt say
Wax temperature93 to 95°C, never over 100°C
Usable range85 to 95°C
Time in the wax3 to 5 minutes, heat off, moving the chain
CoolingAbout 20 minutes, hanging
Before fittingFlex every link until it moves freely

From Squirt's own application instructions. Other waxes use their own temperatures.

When to re-wax

RidingRe-wax
Dry road300 to 500 km
Gravel, dustSooner
Rain, mudAfter the ride

When it starts to sound dry, do it.

Tools

  • Silca Chain Stripper
  • Slow cooker, only for wax
  • Kitchen thermometer
  • Jar with a lid
  • Wire hook or old spoke
  • Reusable quick link (Connex or similar)

Things that catch people out

  • Never heat wax over a flame or in a microwave. A slow cooker or a wax pot with a thermostat is the safe way.
  • Don't skip the strip. Wax won't bond to factory grease or old lube. Silca Chain Stripper gets all of it off and rinses away with water.
  • The first few km feel a bit crunchy as loose wax flakes off. That's normal.
  • A waxed chain is easier to clean next time. Squirt say boiling water with their cleaner does it, no solvent needed, as long as nothing oily has gone on the chain.

From the workshop

I strip every chain with Silca Chain Stripper. It's the best I've used, it's kind to the environment, and it rinses off with water, so there's no solvent to get rid of. Run two chains and swap them, one on the bike and one waxed and waiting. My two-chain wax plan does that by post.

Michael

Book it in

Chains and waxing in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Squirt's Performance Hot Wax and Silca's Chain Stripper instructions.

BookMy Shed