Skip to content

Wheels 3.06

Spoke length

Every wheel build starts with the right spoke lengths, and they come from four numbers: two from the rim and hub makers' spec sheets, one you choose and one you can measure. Get one wrong by a millimetre and the wheel won't build properly.

Get the printable PDF
FRONT VIEWC-FERD ÷ 2FLANGEspokes hook in hereNIPPLE SEATwhere ERD is measuredSIDE VIEW, 3-CROSSERD ÷ 2FLANGE DIAMETERacross the centres of the holesSPOKE LENGTHflange hole to the end of the nippleTRAVERSCanewdon, Essextraversbikes.comSPOKE LENGTHGUIDE 3.06 · SIZES IN MM · NOT TO SCALE
The four numbers: ERD from the rim, flange diameter and centre to flange from the hub, and the lacing. Drawing not to scale.

Measuring them yourself

TWO SPOKES, NIPPLES IN

ERD

Two spokes with nipples in, across the rim. Measure the ends and add the bits sticking out.

HOLE CENTRE TO HOLE CENTRE

Flange diameter

Across the centres of two opposite spoke holes, not the outside of the flange.

C-FEACH SIDE ON ITS OWN

Centre to flange

From the middle of the hub to each flange. Left and right are usually different.

Getting the lengths

  1. Check the makers' spec sheets first. Rim makers list the ERD, hub makers the flange diameters and centre to flange for each side.
  2. Choose the lacing. 3-cross for most 28 and 32 hole wheels. Radial only where the maker allows it.
  3. Put the numbers into a calculator, ours at traversbikes.com/spoke-calculator has most Nextie rims and many hubs built in.
  4. Round to the nearest mm. Between two sizes, go for the shorter one. Rear and disc wheels need a length for each side.

The numbers

NameWhat it isWhere it comes from
ERDEffective rim diameter: where the spoke ends sit inside the rimRim maker's spec, or measure it
Flange diameterAcross the centres of the spoke holesHub maker's spec
Centre to flangeMiddle of the hub to each flangeHub maker's spec, each side
Spoke holes28, 32, 36 and so onRim and hub must match
CrossesHow many spokes each one crossesYour choice: 3-cross is usual
Spoke offsetHoles off centre in some rimsRim spec; Nextie ones are built into our calculator

Rounding

Worked outOrder
290.6 mm291 mm
289.9 mm290 mm
290.5 mm290 mm

Between two sizes, the shorter one.

Tools

  • Vernier callipers
  • Two spokes and nipples, for the ERD
  • Spoke ruler
  • The rim and hub makers' spec sheets

Things that catch people out

  • Flange diameter is not the outside of the flange. It's across the hole centres, so it's smaller.
  • Calculators differ slightly. Use the same one each time, and check its ERD means the same as the rim maker's.
  • Washers under the nipples change the length on some alloy rims.
  • Straight pull hubs use straight pull spokes, and the maker's own numbers.

From the workshop

I build every wheel from these four numbers, and I still check them against the makers' spec sheets before I cut or order a spoke. If you'd rather I did the sums and the build, use the wheel builder on the website.

Michael

Book it in

Spokes in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Park Tool's and Sheldon Brown's spoke length guides.

BookMy Shed