Forks and cockpit 2.03
Stem and handlebar sizes
Stems and bars have to match at two clamps, and a stem's length and angle change how the whole bike feels. This is a straightforward guide to help lift the mystery: which sizes go together, which shims work, and how stems are measured.
Get the printable PDFThree kinds of stem
Threadless
Clamps round the outside of the steerer. Almost every bike made today.
Flipped
Most threadless stems can be turned over to point up or down, which changes the bar height.
Quill
Slides inside a threaded steerer. Older bikes, and some touring and town bikes.
Which one have I got?
- Read the stem. Most have the sizes printed on them, like 31.8, 60 mm and 6°.
- Measure the bar with callipers right next to the stem clamp, where it's widest.
- Measure the stem length from the middle of the steerer to the middle of the bar, not end to end.
- Check the steerer size too. 28.6 mm (1 1/8") is by far the most common. That's guide 2.01.
Handlebar clamp sizes
| Bar clamp (mm) | You'll often find it on |
|---|---|
| 22.2 | BMX |
| 25.4 | Older mountain bikes and many Japanese road bars |
| 26.0 | Older road bars |
| 31.8 | Most road, gravel and mountain bikes |
| 35 | Many newer mountain bikes |
Which shims work
| Stem | Bar or steerer | Works? |
|---|---|---|
| 31.8 stem | 25.4 or 26.0 bar | Yes, with a shim |
| 35 stem | 31.8 bar | Yes, with a shim |
| 31.8 stem | 35 bar | No |
| 28.6 steerer clamp | 25.4 steerer | Yes, with a shim |
Tools
- Vernier or digital callipers
- Torque wrench
- Carbon assembly paste for carbon parts
Things that catch people out
- A 35 bar only fits a 35 stem. There's no shim to make it smaller.
- 25.4 and 26.0 look the same. Measure, don't guess. A 26.0 bar won't clamp safely in a 25.4 stem.
- Keep the faceplate gaps even, top and bottom, and tighten the bolts a little at a time.
- Carbon bars need paste and a torque wrench. Grease lets them slip, and too much force cracks them.
- Stem length is centre to centre. Measuring the outside makes a stem look longer than it is.
From the workshop
Stem length changes how a bike feels more than almost anything else. 10 mm is enough to notice. If you're not sure what you need, bring the bike in and we'll talk it through.
Michael
Book it inStems in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Wikipedia's stem article (from Sheldon Brown) and stem makers' published sizes.
