Skip to content

Gears and drivetrain 5.14

Singlespeed chain length

On a singlespeed there's no derailleur to take up slack, so the chain has to be exactly the right length and tension. Too tight and it binds and wears the bearings, too loose and it jumps off. It's easy once you know how.

Get the printable PDF
WHEEL BACKABOUT 12 MM UP AND DOWNCHAINRINGCOGwheel slid back to tensionShortest chain that fits with the axle near the front of the dropout. Then tension to about 12 mm of slack.TRAVERSCanewdon, Essextraversbikes.comSINGLESPEED CHAIN LENGTHGUIDE 5.14 · SIZES IN MM · NOT TO SCALE
Ring and cog with the chain, the wheel sliding back in a horizontal dropout to tension it. Drawing not to scale.

Three ways to tension it

HORIZONTAL DROPOUT

Horizontal dropouts

Slide the wheel back until the chain is tight enough, then do up the axle.

ECCENTRIC BB: TURN IT TO TENSION

Eccentric bottom bracket

The BB sits off centre in a big shell. Turn it and the cranks move back, tightening the chain.

TENSIONER: VERTICAL DROPOUTS

Tensioner

On frames with vertical dropouts, a sprung arm takes up the slack. The simplest fix, but it adds parts.

Sizing and tensioning

  1. Put the wheel forward in the dropouts, or turn the eccentric to its shortest.
  2. Wrap the chain round the ring and cog and find the shortest length that joins. Cut it there, inner link to inner link.
  3. Fit it and take up the slack by sliding the wheel back or turning the eccentric.
  4. Check the tightest point. Turn the cranks slowly: at the tightest spot the chain should move about 12 mm up and down in the middle.

Troubleshooting

You noticeFix
Chain falls offToo slack, or the chainline is out
Tight spots as the cranks turnRing not round on the spider: shim or rotate the ring
Grinding, cranks hard to turnToo tight: let it off a little
Can't get the right tensionA half link, or one tooth more or less on the cog

Half a link

NeedUse
Half a link moreA half link
A bit more roomCog one tooth bigger

Tools

  • Chain tool or quick link pliers
  • 15 mm spanner or Allen keys for the axle
  • Eccentric BB tool if you have one

Things that catch people out

  • Check the tension at the tightest point. Rings and cogs are never perfectly round, so it changes as you turn the cranks.
  • The wheel has to stay straight as you slide it back. Check it's centred in the frame before you tighten it.
  • Chainline matters more here, with no mech to take up a bent run. Line the ring up with the cog.
  • Singlespeed chains are wider (1/8") on some bikes. Use a chain made for your cog.

From the workshop

On our titanium frames with an eccentric bottom bracket, tensioning takes a couple of minutes with no tensioner to rattle. If you're thinking about a singlespeed build, talk to me about the frame first.

Michael

Book it in

Chains in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Park Tool's singlespeed chain advice.

BookMy Shed