Skip to content

Using our calculators 13.04

Using the spoke length calculator

Building a wheel starts with the right spoke lengths. Our spoke calculator has the sizes for hundreds of rims and hubs built in, so for most wheels you just pick them from a list. This is how to fill it in and what to check before you order spokes.

Get the printable PDF
The calculator at traversbikes.com/spoke-calculator. Rim, hub and lacing on the left, spoke lengths on the right.
The calculator at traversbikes.com/spoke-calculator. Rim, hub and lacing on the left, spoke lengths on the right.

The parts to look at

Lacing

Lacing

Spoke holes and crosses. It starts you on the usual pattern for that hole count. Radial is only for some sides.

Spoke lengths

Spoke lengths

Left and right, rounded to the nearest mm, with the exact figure under each.

Lacing drawing

Lacing drawing

Your pattern drawn out, with the tension difference between sides and the weight of the spokes.

Filling it in

  1. Choose front or rear wheel. Rear wheels and disc fronts usually need different lengths each side.
  2. Choose the rim. Pick a Nextie rim, another brand from the list, or type in the ERD from the rim maker's spec sheet.
  3. Choose the hub. Search by name, like "hope boost" or "dt 240". If it isn't there, choose "Enter hub dimensions".
  4. Set the spoke holes and crosses. Change spoke options if you're not using double butted 2.0/1.8 spokes, then read the lengths.

What the numbers are

NameWhat it isWhere to find it
ERDEffective rim diameter, where the spoke ends sit inside the rimRim maker's spec sheet, or measure it
Flange diameterAcross the centre of the spoke holes on each hub flangeHub maker's spec sheet
Centre to flangeFrom the middle of the hub to each flangeHub maker's spec sheet
Spoke offsetHoles drilled off centre in some rimsRim spec sheet; Nextie ones are built in
CrossesHow many spokes each spoke crosses3-cross for most 28 and 32 hole wheels
Tension ratioLeft side tension as a % of the rightWorked out for you

Rounding

Worked outOrder
290.6 mm291 mm
289.9 mm290 mm
290.5 mm290 mm

Between two sizes, go for the shorter one.

Tools

  • Vernier callipers
  • Spoke ruler
  • Two spokes and nipples, to measure ERD
  • The rim and hub makers' spec sheets

Things that catch people out

  • Check the sizes against the maker's spec. Rims and hubs get updated. One mm out on ERD changes every spoke.
  • Washers under the nipples add to the length on some alloy rims. Tick the box if you use them.
  • Rear and disc wheels are dished, so each side needs its own length. Order them separately.
  • Straight pull hubs need straight pull spokes. Choose the right type in spoke options.

From the workshop

Whatever calculator you use, check the rim and hub sizes against the maker's own spec before you order spokes. If you'd rather not do the sums, press "Have me build this wheel" and I'll build it for you here in Rochford.

Michael

Book it in

Spokes in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against the live spoke length calculator.

BookMy Shed