Skip to content

Lights and e-bikes 11.02

Dynamo wiring looms

The loom is the wiring that joins your dynamo hub to your light, your USB charger and your rear light, with a switch on the bars. It decides what you can run at the same time, so it's worth choosing before the light.

Get the printable PDF
kLite's own diagrams. Left: lights or charging, one or the other. Right: USB always on, so the light and USB share the hub's power.
kLite's own diagrams. Left: lights or charging, one or the other. Right: USB always on, so the light and USB share the hub's power.

The looms

Bar switch loom

Bar switch loom

Hub lead, switch and leads to the light and USB charger, in one. Lights or charge, or USB always on.

Loom with A30 rear port

Loom with A30 rear port

Lights or charge at the switch, plus an A30 lead so a QUBE AC rear light stays on.

Micro-D

Micro-D

A loom with a USB C charger built in and a soft switch. No separate charger needed.

Which loom do I need?

  1. Want it simple? Lights or charge. Full power to the light, or full power to USB, whichever you switch to.
  2. Need to charge with the light on? USB always on. The light takes its share first and USB gets the rest. This is the Race set-up.
  3. Want a rear light from the hub? Choose the loom with the A30 port, or the Micro-D, and a QUBE AC rear light.
  4. Check your hub's plug. Order the SON plug for SON hubs, or SP/Shimano for Shutter Precision and Shimano hubs.

The looms compared

LoomThe switchUSB with the light onRear lightGoes with
Bar switch, lights or chargeLight or USBNoQUBE from the USBULTRA Adventure
Bar switch, USB always onLight on or offYes, after the lightQUBE from the USBULTRA Race
Bar switch with A30 rearLight or USBNoA30 port, stays onQUBE AC
Micro-DLight, USB, or flash and chargeFlash plus about 3/4 chargeA30 portEither ULTRA light
Single lead, no switchNoneAlways on when movingNoneA Micro charger on its own

From kLite's product listings. The Micro-D gives up to 1400 mA from its USB C socket and weighs 66 g.

Hub plugs

HubPlug to order
SON 28, SONdeluxSON
Shutter Precision (SP)SP/Shimano
Shimano dynamoSP/Shimano

Tools

  • Zip ties or frame tape
  • Cable cutters, for neat zip ties
  • Allen keys for the switch clamp

Things that catch people out

  • Lights or charge means one or the other. With the light on, nothing goes to USB. It's the simplest set-up.
  • The Micro-D isn't for SON 29S hubs. They put out twice the voltage for the speed and can overheat it on a fast descent.
  • The Micro-D's hub lead is thin, 3 mm coaxial wire, so it can run inside the frame if you want.
  • The QUBE AC isn't for the ULTRA combo USB charging kit. Use the A30 loom or the Micro-D with it.

From the workshop

Most people only need lights or charge: light at night, charge in the day. Go for USB always on if you race and have a tracker to keep alive through the night. Tell me your hub and what you want to run and I'll put the right loom together for you.

Michael

Book it in

Looms and mounts in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against kLite's own product listings and wiring diagrams.

BookMy Shed