Care and checks 10.11
Degreasing a chain
Before a chain can be waxed, every bit of factory grease and old lube has to come off. Silca Chain Stripper is what I use. It's the best I've found, it's kind to the environment, and it rinses off with water, so there's no solvent to get rid of.
Get the printable PDFGood to know
New chains too
New chains come packed in thick factory grease. It all has to go before the chain is waxed.
On the bike
Silca also give a drip method: a drop on each roller while you backpedal, leave 5 minutes, then repeat.
Rinses with water
No solvents to dispose of. Hot water washes the loosened grease away.
Off the bike, step by step
- Take the chain off and put it in a jar with enough Silca Chain Stripper to cover it.
- Shake it hard for 30 seconds, leave it for 5 to 10 minutes, then shake it again.
- Rinse it in hot water until it runs clear and the chain feels squeaky clean.
- Hang it up to dry completely, then wax it. It has to be fully dry before it goes in the wax.
Silca Chain Stripper, the numbers
| Step | Silca say |
|---|---|
| Soak and shake | 30 seconds of shaking, 5 to 10 minutes soaking, shake again |
| Rinse | With water, hot from the tap |
| Drip method, on the bike | A drop per roller, backpedal, 5 minutes, repeat |
| Then | Dry fully, and straight into the wax |
From Silca's own Chain Stripper instructions.
When to strip
| Chain | Strip |
|---|---|
| New, to wax | Yes |
| Lubed, going to wax | Yes |
| Already waxed | Hot water is enough |
Tools
- Silca Chain Stripper
- A jar with a lid
- Hot water
- Somewhere to hang the chain
- Reusable quick link
Things that catch people out
- Don't skip it on a new chain. Wax won't stick to factory grease and wears off fast.
- Dry means dry. Water left inside the rollers spits in hot wax and stops it getting in.
- Already waxed chains don't need stripping. Hot water cleans them, as long as no lube has gone on.
- Keep it off the brake pads if you use the on-bike method. Cover the rotor with a rag.
From the workshop
Every chain I wax goes through Silca Chain Stripper first, new ones included. It's the best and kindest to the environment I've used, and it's what makes the wax last.
Michael
Book it inCleaning and wax in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Silca's Chain Stripper instructions.

