Skip to content

Care and checks 10.01

The pre-ride check

Most problems on a ride show up before you set off, if you look. This is a straightforward guide to help lift the mystery: a two-minute check that follows the letter M across the bike, so nothing gets missed.

Get the printable PDF
12345Follow the M1 Rear wheel2 Saddle and seatpost3 Cranks and pedals4 Bars, brakes, headset5 Front wheel
Follow the M from the back wheel to the front.

If you only have ten seconds: ABC

A

A for air

Squeeze both tyres, or better, check them with a pump gauge.

B

B for brakes

Pull both levers. They should feel firm and stop well before the bar.

C

C for chain

Clean, lubed and running quietly through the gears.

The M check

  1. Rear wheel. Axle or quick release tight. Spin it: no wobble, no rubbing. Tyre pressure right, no cuts.
  2. Saddle and seatpost. Tight, straight, and the post's minimum insert line hidden.
  3. Cranks and pedals. Rock the cranks side to side: no knock. Pedals tight. Chain clean and lubed.
  4. Bars, brakes and headset. Bars and stem tight. Both brakes firm. Hold the front brake and rock the bike: no knock.
  5. Front wheel. Axle or quick release tight. Spin it, check the tyre, and lift and drop the front to listen for rattles.

What you're checking for

CheckGoodGet it looked at if
TyresFirm, no cuts or bulgesThreads showing, or keeps going soft
BrakesFirm lever, quietLever to the bar, or grinding
WheelsSpin true and quietWobble, rub or play in the bearings
HeadsetNo knock when brakingClunk or notchy steering
CranksNo side-to-side playKnock or creak when pedalling
ChainClean, quiet, shifts cleanlySkipping or jumping gears

Also take

ItemWhy
Spare tube or plugPunctures
Tyre levers and mini pumpTo fix one
Multi-toolLoose bolts
LightsEven in the day

Tools

  • Track pump with a gauge
  • Multi-tool
  • Rag and chain lube

Things that catch people out

  • Squeezing a tyre isn't a pressure check. A gauge is far more accurate. Low pressure is the main cause of pinch flats.
  • Thru-axles work loose too. Check them as well as quick releases.
  • A knock when you brake is often the headset. Get it checked before it wears the bearings out.
  • Lights fail at the worst time. Charge them before you go, not after.

From the workshop

Do the M check before every ride and it becomes habit in a week. If anything doesn't feel right and you can't fix it, don't ride it. Bring it in and we'll take a look.

Michael

Book it in

Pumps in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against British Cycling's and Cycling UK's M check.

BookMy Shed