Skip to content

Brakes 6.02

Brake fluids

Hydraulic brakes use one of two fluids, and putting in the wrong one ruins the brake. This is a straightforward guide to help lift the mystery: which fluid your brakes take, how the two differ, and the mistakes to avoid.

Get the printable PDF
Reservoir capthe fluid type is often printed here Fluid in the leverpushed down the hose to the caliper Hosefull of fluid, no air Pistonspush the pads onto the rotor
A hydraulic disc brake. Drawing not to scale.

The two fluids

MINERAL

Mineral oil

Shimano, Magura, Campagnolo and most Tektro and TRP. Doesn't absorb water and won't hurt paint.

DOT 5.1

DOT fluid

Most SRAM, plus Hope and Hayes. Absorbs water over time and strips paint, so wipe spills straight away.

Which one do I need?

  1. Look at the reservoir cap or lever. Many say MINERAL or DOT on them.
  2. Check the brake maker's manual for your exact model. Some brands use both.
  3. Check the table over the page. If your brake isn't on it, or you're not sure, don't guess. Ask us.
  4. Use the maker's own fluid where they say to. Shimano and Magura each want their own mineral oil.

Which brands use which

BrandFluid
ShimanoMineral oil (Shimano's own)
MaguraMineral oil
CampagnoloMineral oil
Tektro and TRPMineral oil on most models, check yours
SRAMDOT 5.1 on most. Mineral on DB8 and Maven
HopeDOT 5.1
HayesDOT
FormulaCheck your model

How they differ

MineralDOT
Absorbs water?NoYes, slowly
Hurts paint?NoYes
Mix with the other?NeverNever

Tools

  • Bleed kit for your brand
  • The right fluid
  • Nitrile gloves
  • Clean rags and bleed blocks

Things that catch people out

  • Never mix them. Mineral oil in a DOT brake, or DOT in a mineral brake, destroys the seals.
  • DOT 5 is not DOT 5.1. DOT 5 is silicone based and must never go in a bike brake.
  • DOT fluid strips paint. Wipe spills off the frame at once and wash with water.
  • Fluid on the pads ruins them. Contaminated pads need replacing, and the rotor needs cleaning.
  • SRAM isn't all DOT any more. The DB8 and Maven use mineral oil. Check the lever.

From the workshop

If your brakes feel spongy or the lever comes back to the bar, they probably need bleeding. It's a quick job with the right kit. Getting the fluid wrong ruins the seals, so if you're not sure which yours take, bring the bike in.

Michael

Book it in

Brake pads in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Wikipedia's bicycle brake article, Sheldon Brown and BikeRadar's brake fluid guide.

BookMy Shed