Gears and drivetrain 5.06
Narrow-wide chainrings
A chain has wide gaps in its outer links and narrow ones in its inner links. A narrow-wide chainring has thick and thin teeth to match, so each tooth fills its gap and the chain can't slip off sideways. It's what makes a 1x drivetrain work without a chain guide.
Get the printable PDFChoosing a ring
Narrow-wide
Thick, thin, thick around the ring. Always an even number of teeth, so the pattern meets.
Oval
A little bigger where you push hardest. Some riders find climbing smoother. Same narrow-wide teeth.
How it bolts on
To a spider on its bolt circle (BCD), or straight to the crank (direct mount). Must match your crank.
Choosing one
- Check your crank. Direct mount ring for SRAM, Shimano, Race Face Cinch and so on, or the BCD if it's a spider. Guide 1.04 helps.
- Check the offset. Boost and non-Boost rings sit in different places. The wrong one ruins the chainline (guide 5.07).
- Pick the size for your gearing. Our gear calculator shows what each size does on your hill.
- Use it with a clutch mech on a 1x bike. The two together keep the chain on over rough ground.
Ring fitting, at a glance
| Crank | Ring fits by | Notes |
|---|---|---|
| SRAM DUB, Eagle | Direct mount, three bolts | Boost and non-Boost offsets |
| Shimano 12-speed MTB | Direct mount, own spline | Shimano's own rings |
| Race Face Cinch | Direct mount, Cinch | Many offsets |
| Spider cranks | Bolts on the BCD | 104, 110 and 130 mm are common |
Wears out when
| Sign | Means |
|---|---|
| Hooked teeth | Worn |
| New chain skips | Worn |
| Drops on bumps | Check clutch too |
Tools
- Torx T25 or the crank maker's lockring tool
- Torque wrench
- Grease or threadlock as the maker says
Things that catch people out
- Narrow-wide is for 1x. On a double, the front mech has to move the chain across, so rings are shaped differently.
- A chain fitted one link out sits on the wrong teeth and feels rough. Turn the cranks and it settles.
- Odd tooth counts can't be narrow-wide. The pattern has to meet all the way round.
- Change the ring with the chain and cassette if they're all worn. New on old skips.
From the workshop
Garbaruk make narrow-wide rings, round and oval, for nearly every crank mount, and I stock them. Tell me your crank and I'll find the right one.
Michael
Book it inChainrings in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against SRAM, Shimano and Garbaruk ring specs.