Skip to content

Tyres and tubes 4.10

Schwalbe Clik Valve

Clik Valve is Schwalbe's answer to fiddly Presta valves. You swap the valve core for a Clik insert, fit a Clik head to your pump, and the head just clicks on and off. No tip nut to unscrew, and no bent valve tips. We have the kits in stock.

Get the printable PDF
PRESTA COREwhat most bikes have nowTIP NUTunscrew it, pump, do it upVALVE STEMthe same stem stays inCLIK VALVE INSERTscrewed in where the core wasCOLLARthe pump head clicks onto itPLUNGERpress it to let air outPUMP HEADCLICKTRAVERSCanewdon, Essextraversbikes.comSCHWALBE CLIK VALVEGUIDE 4.10 · SIZES IN MM · NOT TO SCALE
A Presta core, a Clik Valve insert in the same valve stem, and the pump head clicking on. Drawing not to scale.

How it works

CORE OUT, INSERT IN

Swap the core

Unscrew the Presta core with the tool in the kit and screw the Clik insert in by hand. The valve stem stays.

PUSH ON, PULL OFF

Click the head on

Push the Clik head on until it clicks, pump, pull it off. It opens the valve as it goes on.

PRESS TOLET AIR OUT

Let air out

Press the plunger in the middle with a fingernail or the edge of the valve cap.

Converting a wheel

  1. Check the valve core comes out. Most tubeless valves and many inner tubes have removable cores. Look for two flats on the core.
  2. Let the air out and unscrew the core. On tubeless, turn the valve to the top first so sealant doesn't come with it.
  3. Screw the Clik insert in by hand until it's snug. Don't use the tool to do it up tight.
  4. Fit the Clik head to your pump and pump up. Check the pressure with a gauge the first time.

What we stock

KitIn the boxFor
Clik Valve conversion kit (3541)Two inserts and a Clik pump headChanging a bike over
Clik Valve inserts (3540)Two insertsMore wheels, once you have the head

Both work on inner tubes and tubeless valves with removable cores.

Works with

Inner tubes, removable coreYes
Tubeless valvesYes
Normal Presta pumpYes, no click
Threaded pump headsNo

Tools

  • Valve core tool (in the kit)
  • Floor pump with a gauge
  • The Clik pump head

Things that catch people out

  • Not every Presta core comes out. Some cheap tubes have fixed cores. Those can't be converted.
  • Some lightweight tubes with plastic valve stems shouldn't be converted. Schwalbe say so for their own Aerothan tubes with black plastic stems.
  • Carry the right head or adapter. A Presta-only mini pump still works on a Clik valve, without the click.
  • Tubeless sealant can gum the insert like any core. Clean or swap it when you refresh the sealant.

From the workshop

No more bent valve tips or air lost when the pump head comes off. The full kit, two inserts and a pump head, does one bike, and it's in the shop if you want to try it.

Michael

Book it in

Clik Valves in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Schwalbe's Clik Valve information.

BookMy Shed