Skip to content

Care and checks 10.11

Degreasing a chain

Before a chain can be waxed, every bit of factory grease and old lube has to come off. Silca Chain Stripper is what I use. It's the best I've found, it's kind to the environment, and it rinses off with water, so there's no solvent to get rid of.

Get the printable PDF
HOT WATER12341 INTO THE STRIPPERchain off the bike2 SHAKE 30 S, WAIT5 to 10 min, shake again3 RINSEin hot water4 DRY IT FULLYthen wax or lubeTRAVERSCanewdon, Essextraversbikes.comDEGREASING A CHAINGUIDE 10.11 · SILCA CHAIN STRIPPER
Into the stripper, shake and wait, rinse in hot water, hang it to dry. Silca's own method.

Good to know

FACTORY GREASE: GETS IT ALL

New chains too

New chains come packed in thick factory grease. It all has to go before the chain is waxed.

ON THE BIKE: A DROP PER ROLLER

On the bike

Silca also give a drip method: a drop on each roller while you backpedal, leave 5 minutes, then repeat.

WATERRINSES OFF: NO SOLVENT

Rinses with water

No solvents to dispose of. Hot water washes the loosened grease away.

Off the bike, step by step

  1. Take the chain off and put it in a jar with enough Silca Chain Stripper to cover it.
  2. Shake it hard for 30 seconds, leave it for 5 to 10 minutes, then shake it again.
  3. Rinse it in hot water until it runs clear and the chain feels squeaky clean.
  4. Hang it up to dry completely, then wax it. It has to be fully dry before it goes in the wax.

Silca Chain Stripper, the numbers

StepSilca say
Soak and shake30 seconds of shaking, 5 to 10 minutes soaking, shake again
RinseWith water, hot from the tap
Drip method, on the bikeA drop per roller, backpedal, 5 minutes, repeat
ThenDry fully, and straight into the wax

From Silca's own Chain Stripper instructions.

When to strip

ChainStrip
New, to waxYes
Lubed, going to waxYes
Already waxedHot water is enough

Tools

  • Silca Chain Stripper
  • A jar with a lid
  • Hot water
  • Somewhere to hang the chain
  • Reusable quick link

Things that catch people out

  • Don't skip it on a new chain. Wax won't stick to factory grease and wears off fast.
  • Dry means dry. Water left inside the rollers spits in hot wax and stops it getting in.
  • Already waxed chains don't need stripping. Hot water cleans them, as long as no lube has gone on.
  • Keep it off the brake pads if you use the on-bike method. Cover the rotor with a rag.

From the workshop

Every chain I wax goes through Silca Chain Stripper first, new ones included. It's the best and kindest to the environment I've used, and it's what makes the wax last.

Michael

Book it in

Cleaning and wax in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Silca's Chain Stripper instructions.

BookMy Shed