Gears and drivetrain 5.03
Chains explained
Every chain has the same 12.7 mm pitch, but they get narrower as the gears go up. A chain has to match how many gears you have, and a few systems only work with their own chain. Here's how to choose one, join it and get the length right.
Get the printable PDFJoining and sizing
Quick link
Two half links that lock as the chain pulls tight. Most 11 and 12-speed links are made to be used once.
Joining pin
Shimano's way: a special pin pushed in with a chain tool, then the guide end snapped off. Never reuse one.
Length
Round the biggest ring and biggest cog, not through the mech, then add two links. Some systems differ.
Which chain do I need?
- Count your gears at the back. Eleven cogs need an 11-speed chain. Look it up in your bike's original spec if you're not sure.
- Check for a system of its own. SRAM T-Type (Transmission), SRAM Flattop road and Shimano Linkglide each need their own chain.
- Choose how you'll join it. A quick link, or a joining pin on some Shimano chains. If you'll take it off to wax it, a reusable link like a Connex is easier.
- Size it before you cut it. Use the old chain if it was right, or the method below. Always count links, not centimetres.
Chain widths by speed
| Speeds | Outer width (approx.) | Inner width | Notes |
|---|---|---|---|
| 6, 7, 8 | 7.1 to 7.3 mm | 2.38 mm (3/32") | Shared across the three |
| 9 | 6.6 mm | 2.18 mm | |
| 10 | 5.9 mm | 2.18 mm | Campagnolo 10 a little wider |
| 11 | 5.5 mm | 2.18 mm | |
| 12 | 5.2 to 5.3 mm | 2.18 mm | SRAM Eagle, Shimano 12, Campagnolo |
| T-Type, Flattop, Linkglide | own shape | Only fits its own system |
Widths vary a little between makers. All chains have a 12.7 mm (1/2") pitch.
When to replace
| Chain | Replace at |
|---|---|
| 11 and 12-speed | 0.5% |
| 6 to 10-speed | 0.75% |
Measured with a chain checker. See guide 10.05.
Tools
- Chain tool
- Quick link pliers
- Chain checker
- Rag and degreaser
Things that catch people out
- A wider chain won't run on a narrower cassette, and it rubs the next cog. Match the speed.
- Most 11 and 12-speed quick links are single use. Fit a new one each time you take the chain off, or use a reusable link.
- Too short can rip the mech off in the biggest gear. Too long and it slaps and drops off.
- Full suspension bikes need sizing at full squash, with the shock air out, where the chain is pulled longest.
From the workshop
A new chain every so often is the cheapest thing you can do for your drivetrain. Leave it too long and it wears out the cassette and chainrings with it. All my chains come plain or hot-waxed, ready to fit.
Michael
Book it inChains in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against makers' chain specs, Park Tool and Sheldon Brown.



