Gears and drivetrain 5.07
Chainline
Chainline is how far the chainring sits from the middle of the frame. It should line up with the middle of the cassette, so the chain runs as straight as it can. Get it wrong and the chain rubs, drops, wears fast and makes a racket at the ends of the cassette.
Get the printable PDFWhat it looks like
Too far in
Rubs the chainstay and drops off in the big cogs. Often a non-Boost ring on a Boost bike.
Straight
The ring lines up with the middle of the cassette. Quiet across the range.
Too far out
Noisy and skips in the small cogs, and can drop off the outside.
Measuring it
- Check your bike's original spec for the chainline and the ring offset. Many cranks say on the box.
- Measure from the seat tube to the middle of the ring, then add half the seat tube's width. That's the distance from the frame centre.
- On a double, measure to the point halfway between the two rings.
- Compare it with the table. A few mm out is fine. More than that and the ring offset or crank is wrong.
Usual chainlines
| Bike | Rear hub | Chainline |
|---|---|---|
| Road double | 130 or 142 mm | 43.5 mm |
| Mountain bike | 142 mm | 49 mm |
| Mountain bike, Boost | 148 mm | 52 mm |
| SRAM T-Type, Super Boost | 148 or 157 mm | 55 mm |
From Park Tool and the crank makers. Chainline is usually set by the chainring's offset, not the spindle.
Fixing it
| Out by | Fix |
|---|---|
| About 3 mm | A ring with the right offset |
| More | Check the crank and BB |
Tools
- Vernier callipers or a ruler
- A straight edge or a long ruler
Things that catch people out
- Boost and non-Boost rings look the same. The difference is a 3 mm offset. Check the ring's markings.
- Bottom bracket spacers move the crank, and the chainline with it. Fit them as the maker says for your shell.
- A 1x chain is never perfectly straight. It runs at an angle at both ends; a good chainline keeps that even.
- Singlespeeds need it spot on, with no mech to take up a bent run. Within a mm or two.
From the workshop
If a 1x bike drops its chain in the easiest gear, check the ring offset before anything else. A Boost frame with a non-Boost ring is the usual cause, and the fix is just the right ring.
Michael
Book it inChainrings in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Park Tool's chainline guide and crank makers' figures.