Nextie Drunken Rhinoceros 128 26" spoke length
ERD 489 mm, made in 32 hole. The holes are staggered 6 mm either side of centre, which the lengths allow for. Pick your hub in the calculator for your exact spoke lengths.
Spoke lengths
Check your rim and hub against the maker's sizes before you order spokes.
Rear wheel, 32 hole, J-bend spokes, 489 mm ERD.
| Side | Spokes | Length |
|---|---|---|
| Left (disc side)3-cross | 16 | 235 mm235.2 worked out |
| Right (drive side)3-cross | 16 | 234 mm233.9 worked out |
Rounded to the nearest mm. Between two sizes, go for the shorter one.
Tension: the left spokes run at 53% of the right side's tension. Bracing angles 6.3° left, 3.3° right. That's a big difference: an asymmetric rim or more crosses on the slack side would even it up.
Weight: these spokes and alloy nipples come to about 172 g (about 193 g with brass nipples).
Order these spokes from me
Email me this list
Save to My Shed
Will my spokes fit?
Ping tuner: what each side should sound like
Pluck each spoke between the rim and where it last crosses another, and match the note. Every spoke on one side should sound the same. It's a guide to even tension by ear, not a tension meter.
Often needed with this wheel
- A Garbaruk cassette
Lightweight 10-52 and 10-44 options for XD, MicroSpline and HG freehubs.
- Nextie fat bike tubeless tape
The wide tape made for Nextie's fat rims.
These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.
Nextie Drunken Rhinoceros 128 26" with common hubs
| Holes | Left | Right | Lacing | |
|---|---|---|---|---|
| Hope Fatsno front 150mm | 32 | 237 mm | 237 mm | 3-cross |
| Hope Fatsno rear 190 QR / 197x12 | 32 | 239 mm | 237 mm | 3-cross |
| Nextie Rollingstar II Fatbike front 150mm | 32 | 237 mm | 237 mm | 3-cross |
| Hope Fatsno front 135mm / 142x15 | 32 | 236 mm | 236 mm | 3-cross |
| Hope Fatsno rear 170 QR / 177x12 | 32 | 237 mm | 236 mm | 3-cross |
Back to the spoke length calculator for how it works and how to measure your own parts.
Want me to build it?
I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.
Price a wheel build