White Industries XMR Boost front 110mm, 6-bolt spoke length
J-bend, 24, 28, 32, 36 hole. Flange diameter 60 mm left and 60 mm right, centre to flange 27 mm left and 38.5 mm right. Pick your rim in the calculator for your exact spoke lengths.
Spoke lengths
Check your rim and hub against the maker's sizes before you order spokes.
Front wheel, 28 hole, J-bend spokes, 591 mm ERD.
| Side | Spokes | Length |
|---|---|---|
| Left (disc side)3-cross | 14 | 291 mm290.5 worked out |
| Right3-cross | 14 | 291 mm291.2 worked out |
Rounded to the nearest mm. Between two sizes, go for the shorter one.
Tension: the right spokes run at 85% of the left side's tension. Bracing angles 5.9° left, 7.0° right.
Weight: these spokes and alloy nipples come to about 182 g (about 201 g with brass nipples).
Order these spokes from me
Email me this list
Save to My Shed
Will my spokes fit?
Ping tuner: what each side should sound like
Pluck each spoke between the rim and where it last crosses another, and match the note. Every spoke on one side should sound the same. It's a guide to even tension by ear, not a tension meter.
Often needed with this wheel
- Make it a dynamo front wheel
A SON hub built into the rim powers kLite lights and charges your phone. No batteries to think about on a long ride.
- Nextie tubeless tape and valves
Ready for the tyre when the wheel is built.
These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.
White Industries XMR Boost front 110mm, 6-bolt with common rims
| Holes | Left | Right | Lacing | |
|---|---|---|---|---|
| Nextie Alpha 36S 29" | 28 | 291 mm | 291 mm | 3-cross |
| Nextie Omega 36U 29" | 28 | 292 mm | 293 mm | 3-cross |
| Nextie Omega 36 29" | 28 | 292 mm | 293 mm | 3-cross |
| Nextie Omega 40 29" | 28 | 292 mm | 292 mm | 3-cross |
| Nextie Omega 40D 29" | 28 | 292 mm | 292 mm | 3-cross |
| Nextie Omega 40-27 27.5" | 28 | 296 mm | 297 mm | 3-cross |
| Nextie Omega 40D-27 27.5" | 28 | 296 mm | 297 mm | 3-cross |
| Nextie Unicorn 32" 32" | 28 | 326 mm | 328 mm | 3-cross |
| Nextie Unicorn 36" 36" | 28 | 365 mm | 366 mm | 3-cross |
| Nextie Alpha 32" 32" | 28 | 320 mm | 321 mm | 3-cross |
| DT Swiss XM 481 29" | 28 | 295 mm | 296 mm | 3-cross |
| DT Swiss EX 511 29" | 28 | 295 mm | 296 mm | 3-cross |
| Hope Fortus 30 29" | 32 | 286 mm | 288 mm | 3-cross |
| Stan's Flow MK3 29" | 32 | 292 mm | 294 mm | 3-cross |
| WTB HTZ i30 29" | 32 | 293 mm | 293 mm | 3-cross |
| Race Face ARC Offset 30 29" | 28 | 295 mm | 295 mm | 3-cross |
Back to the spoke length calculator for how it works and how to measure your own parts.
Want me to build it?
I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.
Price a wheel build