Stan's M-Pulse front 100mm spoke length
J-bend, 24, 28, 32, 36 hole. Flange diameter 63 mm left and 63 mm right, centre to flange 22 mm left and 30 mm right. Pick your rim in the calculator for your exact spoke lengths.
Spoke lengths
Check your rim and hub against the maker's sizes before you order spokes.
Front wheel, 28 hole, J-bend spokes, 591 mm ERD.
| Side | Spokes | Length |
|---|---|---|
| Left (disc side)3-cross | 14 | 290 mm289.9 worked out |
| Right3-cross | 14 | 290 mm290.1 worked out |
Rounded to the nearest mm. Between two sizes, go for the shorter one.
Tension: the right spokes run at 93% of the left side's tension. Bracing angles 4.9° left, 5.3° right.
Weight: these spokes and alloy nipples come to about 182 g (about 200 g with brass nipples).
Order these spokes from me
Email me this list
Save to My Shed
Will my spokes fit?
Ping tuner: what each side should sound like
Pluck each spoke between the rim and where it last crosses another, and match the note. Every spoke on one side should sound the same. It's a guide to even tension by ear, not a tension meter.
Often needed with this wheel
- Make it a dynamo front wheel
A SON hub built into the rim powers kLite lights and charges your phone. No batteries to think about on a long ride.
- Nextie tubeless tape and valves
Ready for the tyre when the wheel is built.
These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.
Stan's M-Pulse front 100mm with common rims
| Holes | Left | Right | Lacing | |
|---|---|---|---|---|
| Nextie Ripple 60GS 700c | 28 | 254 mm | 255 mm | 3-cross |
| Nextie Alpha 45G 700c | 24 | 259 mm | 260 mm | 2-cross |
| Nextie Alpha 55G 700c | 24 | 249 mm | 250 mm | 2-cross |
| Nextie Ocean 45G 700c | 28 | 269 mm | 270 mm | 3-cross |
| Nextie SGV 39 700c | 28 | 275 mm | 276 mm | 3-cross |
| Nextie SGV 44 700c | 28 | 270 mm | 271 mm | 3-cross |
| Nextie SGV 49 700c | 28 | 265 mm | 266 mm | 3-cross |
| Nextie SGV 54 700c | 28 | 260 mm | 261 mm | 3-cross |
| Nextie SGV 59 700c | 28 | 255 mm | 256 mm | 3-cross |
| Nextie SGV 64 700c | 28 | 251 mm | 251 mm | 3-cross |
| DT Swiss RR 421 700c | 28 | 295 mm | 295 mm | 3-cross |
| DT Swiss G 540 700c | 28 | 290 mm | 291 mm | 3-cross |
| Stan's Grail S1 700c | 28 | 289 mm | 289 mm | 3-cross |
| Velocity Aileron 700c | 28 | 286 mm | 287 mm | 3-cross |
Back to the spoke length calculator for how it works and how to measure your own parts.
Want me to build it?
I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.
Price a wheel build