SRAM MTH 716/746 rear 142mm, 6-bolt spoke length
J-bend, 32 hole. Flange diameter 58 mm left and 58 mm right, centre to flange 34 mm left and 20.4 mm right. Pick your rim in the calculator for your exact spoke lengths.
Spoke lengths
Check your rim and hub against the maker's sizes before you order spokes.
Rear wheel, 28 hole, J-bend spokes, 591 mm ERD.
| Side | Spokes | Length |
|---|---|---|
| Left (disc side)3-cross | 14 | 291 mm290.6 worked out |
| Right (drive side)3-cross | 14 | 290 mm289.9 worked out |
Rounded to the nearest mm. Between two sizes, go for the shorter one.
Tension: the left spokes run at 78% of the right side's tension. Bracing angles 5.7° left, 4.5° right.
Weight: these spokes and alloy nipples come to about 182 g (about 200 g with brass nipples).
Order these spokes from me
Email me this list
Save to My Shed
Will my spokes fit?
Ping tuner: what each side should sound like
Pluck each spoke between the rim and where it last crosses another, and match the note. Every spoke on one side should sound the same. It's a guide to even tension by ear, not a tension meter.
Often needed with this wheel
- A Garbaruk cassette
Lightweight 10-52 and 10-44 options for XD, MicroSpline and HG freehubs.
- Nextie tubeless tape and valves
Ready for the tyre when the wheel is built.
These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.
SRAM MTH 716/746 rear 142mm, 6-bolt with common rims
| Holes | Left | Right | Lacing | |
|---|---|---|---|---|
| Nextie Ripple 60GS 700c | 32 | 251 mm | 249 mm | 3-cross |
| Nextie Ocean 45G 700c | 32 | 266 mm | 265 mm | 3-cross |
| Nextie SGV 39 700c | 32 | 272 mm | 271 mm | 3-cross |
| Nextie SGV 44 700c | 32 | 267 mm | 266 mm | 3-cross |
| Nextie SGV 49 700c | 32 | 262 mm | 261 mm | 3-cross |
| Nextie SGV 54 700c | 32 | 257 mm | 256 mm | 3-cross |
| Nextie SGV 59 700c | 32 | 252 mm | 251 mm | 3-cross |
| Nextie SGV 64 700c | 32 | 247 mm | 246 mm | 3-cross |
| Nextie SGX 30 700c | 32 | 281 mm | 280 mm | 3-cross |
| Nextie SGX 35 700c | 32 | 276 mm | 275 mm | 3-cross |
| DT Swiss RR 421 700c | 32 | 291 mm | 290 mm | 3-cross |
| DT Swiss G 540 700c | 32 | 287 mm | 286 mm | 3-cross |
| Velocity Aileron 700c | 32 | 283 mm | 282 mm | 3-cross |
Back to the spoke length calculator for how it works and how to measure your own parts.
Want me to build it?
I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.
Price a wheel build