Shimano Deore XT HB-M8210 front 110mm, Centrelock spoke length
J-bend, 28, 32 hole. Flange diameter 44 mm left and 44 mm right, centre to flange 28.2 mm left and 39 mm right. Pick your rim in the calculator for your exact spoke lengths.
Spoke lengths
Check your rim and hub against the maker's sizes before you order spokes.
Front wheel, 28 hole, J-bend spokes, 591 mm ERD.
| Side | Spokes | Length |
|---|---|---|
| Left (disc side)3-cross | 14 | 292 mm291.8 worked out |
| Right3-cross | 14 | 292 mm292.3 worked out |
Rounded to the nearest mm. Between two sizes, go for the shorter one.
Tension: the right spokes run at 87% of the left side's tension. Bracing angles 6.1° left, 7.1° right.
Weight: these spokes and alloy nipples come to about 183 g (about 201 g with brass nipples).
Order these spokes from me
Email me this list
Save to My Shed
Will my spokes fit?
Ping tuner: what each side should sound like
Pluck each spoke between the rim and where it last crosses another, and match the note. Every spoke on one side should sound the same. It's a guide to even tension by ear, not a tension meter.
Often needed with this wheel
- Make it a dynamo front wheel
A SON hub built into the rim powers kLite lights and charges your phone. No batteries to think about on a long ride.
- Nextie tubeless tape and valves
Ready for the tyre when the wheel is built.
These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.
Shimano Deore XT HB-M8210 front 110mm, Centrelock with common rims
| Holes | Left | Right | Lacing | |
|---|---|---|---|---|
| Nextie Alpha 36S 29" | 28 | 292 mm | 292 mm | 3-cross |
| Nextie Omega 36U 29" | 28 | 293 mm | 294 mm | 3-cross |
| Nextie Omega 36 29" | 28 | 293 mm | 294 mm | 3-cross |
| Nextie Omega 40 29" | 28 | 293 mm | 293 mm | 3-cross |
| Nextie Omega 40D 29" | 28 | 293 mm | 293 mm | 3-cross |
| Nextie Omega 40-27 27.5" | 28 | 298 mm | 298 mm | 3-cross |
| Nextie Omega 40D-27 27.5" | 28 | 298 mm | 298 mm | 3-cross |
| Nextie Unicorn 32" 32" | 28 | 328 mm | 329 mm | 3-cross |
| Nextie Unicorn 36" 36" | 28 | 367 mm | 368 mm | 3-cross |
| Nextie Alpha 32" 32" | 28 | 321 mm | 322 mm | 3-cross |
| DT Swiss XM 481 29" | 28 | 296 mm | 298 mm | 3-cross |
| DT Swiss EX 511 29" | 28 | 296 mm | 298 mm | 3-cross |
| Hope Fortus 30 29" | 32 | 289 mm | 290 mm | 3-cross |
| Stan's Flow MK3 29" | 32 | 295 mm | 296 mm | 3-cross |
| WTB HTZ i30 29" | 32 | 295 mm | 295 mm | 3-cross |
| Race Face ARC Offset 30 29" | 28 | 296 mm | 297 mm | 3-cross |
Back to the spoke length calculator for how it works and how to measure your own parts.
Want me to build it?
I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.
Price a wheel build