Nextie Rollingstar II MTB rear 148mm (straight pull) spoke length
Straight pull, 28 hole. Flange diameter 38 mm left and 40 mm right, centre to flange 35.1 mm left and 21.5 mm right. Spoke offset 2 mm left, 1 mm right. Pick your rim in the calculator for your exact spoke lengths.
Spoke lengths
Check your rim and hub against the maker's sizes before you order spokes.
Rear wheel, 28 hole, straight-pull spokes, 591 mm ERD.
| Side | Spokes | Length |
|---|---|---|
| Left (disc side)3-cross | 14 | 296 mm295.6 worked out |
| Right (drive side)3-cross | 14 | 294 mm293.7 worked out |
Rounded to the nearest mm. Between two sizes, go for the shorter one.
Tension: the left spokes run at 77% of the right side's tension. Bracing angles 6.2° left, 4.8° right.
Weight: these spokes and alloy nipples come to about 185 g (about 203 g with brass nipples).
Order these spokes from me
Email me this list
Save to My Shed
Will my spokes fit?
Ping tuner: what each side should sound like
Pluck each spoke between the rim and where it last crosses another, and match the note. Every spoke on one side should sound the same. It's a guide to even tension by ear, not a tension meter.
Often needed with this wheel
- A Garbaruk cassette
Lightweight 10-52 and 10-44 options for XD, MicroSpline and HG freehubs.
- Nextie tubeless tape and valves
Ready for the tyre when the wheel is built.
These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.
Nextie Rollingstar II MTB rear 148mm (straight pull) with common rims
| Holes | Left | Right | Lacing | |
|---|---|---|---|---|
| Nextie Alpha 36S 29" | 28 | 296 mm | 294 mm | 3-cross |
| Nextie Omega 36U 29" | 28 | 297 mm | 295 mm | 3-cross |
| Nextie Omega 36 29" | 28 | 297 mm | 295 mm | 3-cross |
| Nextie Omega 40 29" | 28 | 297 mm | 295 mm | 3-cross |
| Nextie Omega 40D 29" | 28 | 297 mm | 295 mm | 3-cross |
| Nextie Omega 40-27 27.5" | 28 | 302 mm | 300 mm | 3-cross |
| Nextie Omega 40D-27 27.5" | 28 | 302 mm | 300 mm | 3-cross |
| Nextie Unicorn 32" 32" | 28 | 332 mm | 330 mm | 3-cross |
| Nextie Unicorn 36" 36" | 28 | 371 mm | 369 mm | 3-cross |
| Nextie Alpha 32" 32" | 28 | 326 mm | 323 mm | 3-cross |
| DT Swiss XM 481 29" | 28 | 301 mm | 298 mm | 3-cross |
| DT Swiss EX 511 29" | 28 | 301 mm | 298 mm | 3-cross |
| Race Face ARC Offset 30 29" | 28 | 300 mm | 298 mm | 3-cross |
Back to the spoke length calculator for how it works and how to measure your own parts.
Want me to build it?
I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.
Price a wheel build