Hope Pro 5 front 100mm, Centrelock spoke length
J-bend, 24, 28, 32, 36 hole. Flange diameter 43 mm left and 43 mm right, centre to flange 22 mm left and 33 mm right. Pick your rim in the calculator for your exact spoke lengths.
Spoke lengths
Check your rim and hub against the maker's sizes before you order spokes.
Front wheel, 28 hole, J-bend spokes, 591 mm ERD.
| Side | Spokes | Length |
|---|---|---|
| Left (disc side)3-cross | 14 | 291 mm291.2 worked out |
| Right3-cross | 14 | 292 mm291.7 worked out |
Rounded to the nearest mm. Between two sizes, go for the shorter one.
Tension: the right spokes run at 83% of the left side's tension. Bracing angles 4.9° left, 5.9° right.
Weight: these spokes and alloy nipples come to about 183 g (about 201 g with brass nipples).
Order these spokes from me
Email me this list
Save to My Shed
Will my spokes fit?
Ping tuner: what each side should sound like
Pluck each spoke between the rim and where it last crosses another, and match the note. Every spoke on one side should sound the same. It's a guide to even tension by ear, not a tension meter.
Often needed with this wheel
- Make it a dynamo front wheel
A SON hub built into the rim powers kLite lights and charges your phone. No batteries to think about on a long ride.
- Nextie tubeless tape and valves
Ready for the tyre when the wheel is built.
These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.
Hope Pro 5 front 100mm, Centrelock with common rims
| Holes | Left | Right | Lacing | |
|---|---|---|---|---|
| Nextie Ripple 60GS 700c | 28 | 255 mm | 256 mm | 3-cross |
| Nextie Alpha 45G 700c | 24 | 263 mm | 264 mm | 2-cross |
| Nextie Alpha 55G 700c | 24 | 253 mm | 254 mm | 2-cross |
| Nextie Ocean 45G 700c | 28 | 271 mm | 272 mm | 3-cross |
| Nextie SGV 39 700c | 28 | 277 mm | 278 mm | 3-cross |
| Nextie SGV 44 700c | 28 | 272 mm | 273 mm | 3-cross |
| Nextie SGV 49 700c | 28 | 267 mm | 268 mm | 3-cross |
| Nextie SGV 54 700c | 28 | 262 mm | 263 mm | 3-cross |
| Nextie SGV 59 700c | 28 | 257 mm | 258 mm | 3-cross |
| Nextie SGV 64 700c | 28 | 252 mm | 253 mm | 3-cross |
| DT Swiss RR 421 700c | 28 | 296 mm | 297 mm | 3-cross |
| DT Swiss G 540 700c | 28 | 291 mm | 293 mm | 3-cross |
| Stan's Grail S1 700c | 28 | 290 mm | 291 mm | 3-cross |
| Velocity Aileron 700c | 28 | 288 mm | 289 mm | 3-cross |
Back to the spoke length calculator for how it works and how to measure your own parts.
Want me to build it?
I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.
Price a wheel build