Skip to content
TraversTravers
Home
Servicing
Shop
Frames
Bespoke framesHow bespoke frames workRoad raceRoad enduranceGravel32-inch gravelMountain bike (29er)32-inch mountain bikeFat bike
Design your frameSpecial builds
GuidesHow to choose a sizeWhy titanium?What a frame costs32-inch wheels explained29+ wheelsAll guides
Complete bike builds5-year warranty
EVO Prong
kLite
Nextie
Garbaruk
WheelsBuild a wheelDynamo wheelsFat bike wheels32-inch wheels29+ wheelsNextie in the UK
Bikepacking
JournalAll postsGuidesMy storyDynamo and bikepackingVideos
Search
Basket
My Shed
Contact

ENVE INNERDRIVE road rear (straight pull) spoke length

Straight pull, 24 hole. Flange diameter 38.15 mm left and 50.75 mm right, centre to flange 35.9 mm left and 18.3 mm right. ENVE give one length for every spoke: half the rim's ERD, less 2 mm. Pick your rim in the calculator for your exact spoke lengths.

Rim

ERD 591 mm, made in 24, 28 hole. Asymmetric: the spoke holes sit 3 mm off centre, allowed for in the lengths.

Some alloy rims use them. Leave empty if you don't.

How to measure ERD yourself
gapspoke + nipple,screwed on flushERD = spoke + spoke+ gap

Take two spokes of a known length and screw a nipple onto each until the thread end is flush with the top of the nipple. Drop them through opposite spoke holes so the nipples sit in the rim as they would in a built wheel. Pull them tight towards each other and measure the gap between the bent ends. ERD is the gap plus both spoke lengths.

Hub

Straight pull. Flange diameter 38.15 / 50.75 mm, centre to flange 35.9 / 18.3 mm (left / right).

Hub not listed? Choose "Type in my hub", or tell me which one and I'll add it.

Lacing

ENVE give one spoke length for every spoke on this hub: half the rim's ERD, less 2 mm. Lace it to their pattern.

Spokes

Used for the stretch, the weight and the ping note.

Most wheels 100 to 130. Check your rim's limit.

Spoke lengths

Check your rim and hub against the maker's sizes before you order spokes.

Rear wheel, 24 hole, straight-pull spokes, 591 mm ERD.

SideSpokesLength
Left (disc side)ENVE's pattern12294 mm293.5 worked out
Right (drive side)ENVE's pattern12294 mm293.5 worked out

Rounded to the nearest mm. Between two sizes, go for the shorter one.

Weight: these spokes and alloy nipples come to about 158 g (about 173 g with brass nipples).

Have me build this wheel

Order these spokes from me

24 spokes and nipples, about £80.40 before postage. I'll email you to confirm the price and postage before you pay anything.

Email me this list
Save to My Shed
Will my spokes fit?

Often needed with this wheel

These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.

ENVE INNERDRIVE road rear (straight pull) with common rims

Straight-pull lengths include the hub maker's spoke offset. Rounded to the nearest mm.
HolesLeftRightLacing
Nextie Alpha 36S 29"24294 mm294 mmENVE's pattern
Nextie Omega 36U 29"24295 mm295 mmENVE's pattern
Nextie Omega 36 29"24295 mm295 mmENVE's pattern
Nextie NXT29UM27 29"24296 mm296 mmENVE's pattern
Nextie NXT29UM30 29"24293 mm293 mmENVE's pattern
Nextie NXT29UM32 29"24293 mm293 mmENVE's pattern
Nextie NXT29XM33 29"24289 mm289 mmENVE's pattern
Nextie NXT29VM30U 29"24296 mm296 mmENVE's pattern
Nextie NXT29VM35U 29"24293 mm293 mmENVE's pattern
Nextie NXT29VM37U 29"24293 mm293 mmENVE's pattern

Back to the spoke length calculator for how it works and how to measure your own parts.

A pair of Nextie carbon wheels built at Travers Bikes

Want me to build it?

I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.

Price a wheel build
BookMy Shed