Skip to content
TraversTravers
Home
Servicing
Shop
Frames
Bespoke framesHow bespoke frames workRoad raceRoad enduranceGravel32-inch gravelMountain bike (29er)32-inch mountain bikeFat bike
Design your frameSpecial builds
GuidesHow to choose a sizeWhy titanium?What a frame costs32-inch wheels explained29+ wheelsAll guides
Complete bike builds5-year warranty
EVO Prong
kLite
Nextie
Garbaruk
WheelsBuild a wheelDynamo wheelsFat bike wheels32-inch wheels29+ wheelsNextie in the UK
Bikepacking
JournalAll postsGuidesMy storyDynamo and bikepackingVideos
Search
Basket
My Shed
Contact

e*thirteen Sidekick Pro SP front 110mm (straight pull) spoke length

Straight pull, 28, 32 hole. Flange diameter 43 mm left and 44 mm right, centre to flange 27 mm left and 37 mm right. Spoke offset 1 mm left, 1 mm right. e*thirteen set the lacing on this hub, and the calculator follows it. Pick your rim in the calculator for your exact spoke lengths.

Rim

ERD 591 mm, made in 24, 28 hole. Asymmetric: the spoke holes sit 3 mm off centre, allowed for in the lengths.

Some alloy rims use them. Leave empty if you don't.

How to measure ERD yourself
gapspoke + nipple,screwed on flushERD = spoke + spoke+ gap

Take two spokes of a known length and screw a nipple onto each until the thread end is flush with the top of the nipple. Drop them through opposite spoke holes so the nipples sit in the rim as they would in a built wheel. Pull them tight towards each other and measure the gap between the bent ends. ERD is the gap plus both spoke lengths.

Hub

Straight pull. Flange diameter 43 / 44 mm, centre to flange 27 / 37 mm, spoke offset 1 / 1 mm (left / right).

Hub not listed? Choose "Type in my hub", or tell me which one and I'll add it.

Lacing

e*thirteen set the lacing for this hub. 4-cross on both sides.

Spokes

Used for the stretch, the weight and the ping note.

Most wheels 100 to 130. Check your rim's limit.

Spoke lengths

Check your rim and hub against the maker's sizes before you order spokes.

Front wheel, 28 hole, straight-pull spokes, 591 mm ERD.

SideSpokesLength
Left (disc side)e*thirteen's pattern14304 mm303.5 worked out
Righte*thirteen's pattern14304 mm304.1 worked out

Rounded to the nearest mm. Between two sizes, go for the shorter one.

Tension: the right spokes run at 88% of the left side's tension. Bracing angles 5.7° left, 6.4° right.

Weight: these spokes and alloy nipples come to about 190 g (about 208 g with brass nipples).

Have me build this wheel

Order these spokes from me

28 spokes and nipples, about £93.80 before postage. I'll email you to confirm the price and postage before you pay anything.

Email me this list
Save to My Shed
Will my spokes fit?

Often needed with this wheel

These lengths come from the makers' published sizes and a standard sum. Rims and hubs vary from batch to batch, and sizes you put in yourself are only as good as your measuring. Travers Bikes takes no responsibility for spoke lengths worked out with this calculator, or for spokes, wheels or parts bought or built using them.

e*thirteen Sidekick Pro SP front 110mm (straight pull) with common rims

Straight-pull lengths include the hub maker's spoke offset. Rounded to the nearest mm.
HolesLeftRightLacing
Nextie Ripple 60GS 700c28267 mm269 mme*thirteen's pattern
Nextie Ocean 45G 700c28283 mm284 mme*thirteen's pattern
Nextie SGV 39 700c28289 mm290 mme*thirteen's pattern
Nextie SGV 44 700c28284 mm285 mme*thirteen's pattern
Nextie SGV 49 700c28279 mm280 mme*thirteen's pattern
Nextie SGV 54 700c28274 mm275 mme*thirteen's pattern
Nextie SGV 59 700c28269 mm270 mme*thirteen's pattern
Nextie SGV 64 700c28264 mm265 mme*thirteen's pattern
Nextie SGX 30 700c28298 mm299 mme*thirteen's pattern
Nextie SGX 35 700c28293 mm294 mme*thirteen's pattern
DT Swiss RR 421 700c28308 mm309 mme*thirteen's pattern
DT Swiss G 540 700c28304 mm305 mme*thirteen's pattern
Stan's Grail S1 700c28302 mm303 mme*thirteen's pattern
Velocity Aileron 700c28300 mm301 mme*thirteen's pattern

Back to the spoke length calculator for how it works and how to measure your own parts.

A pair of Nextie carbon wheels built at Travers Bikes

Want me to build it?

I hand-build wheels in Rochford with Nextie carbon rims and Hope, DT Swiss, Chris King, Shimano, Nextie and SON hubs. I work out the spokes and order them, so getting the length right is my job, not yours.

Price a wheel build
BookMy Shed