Skip to content

Care and checks 10.02

Washing a bike

A clean bike runs better, lasts longer and shows up problems before they get expensive. The trick is doing it in the right order and keeping water and degreaser out of the places they do harm: the bearings and the brakes.

Get the printable PDF
123451DRIVETRAIN FIRSTchain, cassette, chainrings2WHEELS AND TYRESa soft brush, keep off the rotors3FRAME, TOP TO BOTTOMbike wash, soft brush4RINSE GENTLYa hose on low, never a jet wash5DRY, THEN WAX OR LUBEbounce it, wipe it, run the gearsTRAVERSCanewdon, Essextraversbikes.comWASHING A BIKEGUIDE 10.02 · SIZES IN MM · NOT TO SCALE
Work from the dirtiest part to the cleanest, top to bottom, then dry it.

Three rules

LOW PRESSURE, FROM ABOVE

Low pressure

A hose on low or a watering can. Let the water run off rather than blasting it.

NO JET WASH ON BEARINGS

No jet wash

A jet washer forces water past the seals into the headset, hubs and bottom bracket.

NO DEGREASER ON ROTORS

Brakes clean

Keep degreaser and bike wash off the rotors and pads. Clean rotors with isopropyl alcohol.

Washing, step by step

  1. Do the drivetrain first. On a waxed chain, warm water and a brush is enough. On a lubed one, degreaser, then rinse it off well.
  2. Wet the bike, then bike wash, working top to bottom with a soft brush. Wheels and tyres last.
  3. Rinse gently from the top, so the dirt runs down and off.
  4. Dry it, then re-wax or lube. Bounce it, wipe it with a clean cloth, and run through the gears.

What to use where

PartUseAvoid
Frame and forkBike wash, soft brushHousehold cleaners on paint and decals
Waxed chainWarm water, brushDegreaser: it strips the wax
Lubed chainDegreaser, then rinseLeaving degreaser in the chain
Rotors and padsIsopropyl alcohol onlyBike wash, degreaser, lube
BearingsA light rinseJet wash, aiming water at seals
Suspension stanchionsA wipe with a clean clothBrushes and degreaser on the seals

Things that catch people out

  • Waxed chains don't need degreaser. Degreaser strips the wax. Warm water and a brush does it.
  • Dry the chain straight away or it rusts, unless it's waxed.
  • Check the bike while it's clean. Cracks, worn pads and loose bolts are easy to see now.
  • Don't lay the bike on its drive side to wash it; it bends the mech hanger.

Tools

  • Bucket and warm water
  • Bike wash
  • Soft brushes, one kept just for the drivetrain
  • Clean cloths
  • Isopropyl alcohol for the rotors

From the workshop

A waxed chain is the biggest time saver here: no degreaser, no black mess, just warm water. Wash the bike while the mud's still wet, it comes off in half the time.

Michael

Book it in

Cleaning kit in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026.

BookMy Shed