Skip to content

Tyres and tubes 4.05

Valves and inner tubes

There are three kinds of bike valve, and your pump, your rim and your spare tube all have to match yours. Then the tube has to suit your tyre size and the valve has to be long enough for your rim. Here's how to get all three right.

Get the printable PDF
PRESTAroad, gravel, most MTB6TIP NUTunscrew it to pumpLOCK RINGSCHRADERcar tyre valve, kids' and town bikes8PIN IN THE MIDDLEpush to let air outDUNLOP (WOODS)Dutch and older bikes8CAP NUTholds the insert inRIM HOLE6.5 mm for Presta, 8.5 mm for SchraderTRAVERSCanewdon, Essextraversbikes.comVALVES AND INNER TUBESGUIDE 4.05 · SIZES IN MM · NOT TO SCALE
The three valves side by side in their rim holes. Drawing not to scale, sizes in millimetres.

What the tube is made of

BUTYLTOUGH, HOLDS AIR

Butyl

The normal black tube. Tough, cheap and holds air for weeks.

LATEXSUPPLE, LOSES AIR

Latex

Supple and fast, but loses air overnight. Pump it before every ride.

TPULIGHT, PACKS SMALL

TPU

Very light and packs tiny. A good spare to carry. Needs its own patches.

Choosing a tube

  1. Read the tyre size on the sidewall: 700x28, 29x2.4, 40-622. The tube box lists a range of sizes it fits.
  2. Match the valve to your rim hole. A Presta tube in a Schrader hole needs an adaptor ring, or it moves and tears.
  3. Choose the valve length. It should stick out of the rim far enough for the pump head. Deep rims need 60 or 80 mm.
  4. Choose the material. Butyl for everyday riding, TPU as a spare, latex if you want the speed and don't mind pumping.

The three valves

ValveBodyRim holeFound on
Presta6 mm6.5 mmRoad, gravel and most mountain bikes
Schrader8 mm8.5 mmKids' and town bikes, some MTB; same as a car
Dunlop (Woods)8 mm8.5 mmDutch and older bikes

Valve length

Rim depthValve
Under 25 mm40 mm
25 to 45 mm60 mm
Over 45 mm80 mm

Tools

  • Pump to suit your valve
  • Tyre levers
  • Valve core tool for Presta cores
  • Patches to suit the tube

Things that catch people out

  • Not every Presta core comes out. Removable cores are needed to add sealant or fit an extender.
  • Tighten the Presta tip nut after pumping, or it lets air out slowly.
  • Don't overtighten the lock ring. Finger tight. Too tight and it tears the valve off the tube.
  • One tube fits a range of widths, but not every range. A 25 mm tube in a 40 mm tyre will burst.

From the workshop

If you're forever pumping up a slow puncture, check the valve before the tube. A loose Presta core is the cause more often than you'd think, and a valve core tool fixes it in seconds.

Michael

Book it in

Tyres and tubes in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against makers' valve and rim hole sizes.

BookMy Shed