Using our calculators 13.01
Using the tyre pressure calculator
Our tyre pressure calculator gives you a front and rear pressure from your weight, tyres, rim and the ground you ride on. This is how to fill it in, box by box, and what to do with the answer once you've got it.
Get the printable PDF
The parts to look at

Your pressures
Front and rear in psi and bar, with a range to try either side. The bar under each shows where it sits for that kind of bike.

Surface, set-up and casing
Rougher ground, tubeless and lighter casings all bring the number down. Tubes and tough casings push it up.

Ride feel and hookless
The slider moves you up to 8% firmer or softer. Tick hookless and it won't go over a hookless rim's limit.
Filling it in
- Pick your rim if it's a Nextie, and it fills in the rim width and wheel size. Then choose what you're riding: this sets how your weight splits front to rear.
- Put in the total weight of you, the bike and everything you carry, in kg or lb. E-bikes: include the battery.
- Add the tyre width and rim width. Tyre width as printed on the sidewall, in mm or inches. Rim width is the inside measurement, in mm.
- Set the surface, tubeless or tubes, and casing, then read your pressures on the right. Use "Copy my numbers" to keep them.
Every box explained
| Box | What to put in | What it does to the answer |
|---|---|---|
| Use one of our rims | Your Nextie rim, if you have one | Fills in rim width and wheel size |
| What are you riding? | The bike you're setting up | Sets the front and rear split and the limits |
| Total weight | You, bike, bags, water, clothes | Heavier means more pressure, in proportion |
| Tyre width | The size on the sidewall, e.g. 28 or 2.4 | Wider tyres need a lot less air |
| Rim internal width | Inside width in mm | Wider rims let you run a little less |
| Wheel size | For reference only | Doesn't change the numbers |
| Surface | Where you mostly ride | Rough or loose ground lowers it |
| Tyre set-up and casing | Tubeless or tube, light to tough | Tubes add about 18%, tough casings about 6% |
| How do you want it to ride? | Slide towards firmer or comfier | 2% a step, up to 8% either way |
| My rim is hookless | Tick if your rim has no hook | Caps road and gravel at 72.5 psi, MTB at 30 psi |
Things that catch people out
- It's a starting point. Ride on it, then drop 1 to 2 psi at a time until the tyre feels vague, and go back up one step.
- Weight means everything, not just you. A loaded bikepacking bike can add 20 kg or more.
- The tyre's real width can differ from the number on the sidewall. Put in the printed size; the calculator allows for the rim.
- Hookless limits are typical figures. Your rim maker's own maximum is the one that counts, and so is the tyre's.
- Copy share link saves your set-up. Open it later, or send it to someone, and every box is filled in again.
Tools
- Track pump with a gauge
- Digital pressure gauge
- Vernier callipers, to measure the rim
From the workshop
I built this because the pressure charts on the back of a pump don't know what tyre you're on or how much you weigh. Have a go with your own numbers, then try a couple of psi either side on a ride you know well. If you'd like a hand setting up tubeless while you're at it, book it in.
Michael
Book it inGet the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against the live tyre pressure calculator.