Skip to content

Using our calculators 13.03

Using the gear calculator

Can you get a loaded bike up the steepest hill on your route without walking? The gear calculator works it out from your weight, the hill, the surface and how hard you can push, then suggests a chainring and cassette and lets you compare it with your own bike.

Get the printable PDF
The calculator at traversbikes.com/gear-calculator. You and the hill on the left, the gearing you need on the right.
The calculator at traversbikes.com/gear-calculator. You and the hill on the left, the gearing you need on the right.

The parts to look at

What you need

What you need

Your climbing speed on that hill, and the chainring and cassette that let you keep your cadence.

Compare set-ups

Compare set-ups

Put in your own chainring and cassette, then add a second set-up to see them side by side.

Every gear listed

Every gear listed

Each gear's ratio, how far one turn of the pedals takes you, and your speed. Shaded gears hold your cadence on the hill.

Filling it in

  1. Put in your weight and the weight of the bike, bags and kit. A loaded bikepacking bike is often 20 to 30 kg.
  2. Set the steepest hill you expect as a %, and the cadence you like uphill. 60 to 80 rpm suits most people on a long climb.
  3. Choose the surface on that hill and how hard you can push. Or tap "I know my watts" and put in your own.
  4. Choose your wheel and tyre and the freehub on your rear wheel, then read what you need on the right.
  5. Press "Compare it with my bike" and put in your chainring and cassette to see if you're close.

How hard can you push uphill?

What each choice means, for a long climb. The calculator multiplies it by your weight.

ChoiceSounds like you ifWatts per kg
Easy-goingYou ride now and then and like to chat on the climbs1.5
RegularYou ride most weeks and can climb for half an hour2.0
FitYou ride a lot and climb well, even with bags2.5
RacerYou train and race, or ride long events3.2

Reading the gear list

ColumnWhat it is
32 x 50Chainring x cog
1.50 mDistance per pedal turn
3.6 mphSpeed at your cadence
ShadedHolds your cadence on the hill

Tools

  • A route with the steepest gradient on it (Komoot, RideWithGPS)
  • Bathroom scales, for you and the loaded bike

Things that catch people out

  • Use the steepest bit, not the average. A 6% climb with a 15% ramp in it needs gearing for 15%.
  • Weigh the bike loaded. Water and food on a long day can add 5 kg on their own.
  • Check the freehub before you buy. A cassette has to match it. The calculator only suggests cassettes that fit the one you picked.
  • Chainrings have to fit your crank. Direct mount, spider or Cinch. If yours isn't listed, ask us.
  • Walking is fine. Below about 4.5 km/h you're as quick pushing. The calculator tells you when you'd be quicker walking.

From the workshop

It's much easier to sort lower gears before a loaded trip than halfway up a hill on one. Put your heaviest set-up and your worst hill in, and if the answer says you'll be grinding at 40 rpm, sort it now. A smaller chainring is often the cheapest fix.

Michael

Book it in

Cassettes in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against the live gear calculator.

BookMy Shed