Skip to content

Forks and cockpit 2.03

Stem and handlebar sizes

Stems and bars have to match at two clamps, and a stem's length and angle change how the whole bike feels. This is a straightforward guide to help lift the mystery: which sizes go together, which shims work, and how stems are measured.

Get the printable PDF
length Steerer clamp28.6 on most bikes Steerer bolts Bar clamp31.8 or 35 Faceplatekeep the gaps even Measured from steerer centre to bar centre
A stem from the side. Drawing not to scale.

Three kinds of stem

Threadless

Clamps round the outside of the steerer. Almost every bike made today.

Flipped

Most threadless stems can be turned over to point up or down, which changes the bar height.

Quill

Slides inside a threaded steerer. Older bikes, and some touring and town bikes.

Which one have I got?

  1. Read the stem. Most have the sizes printed on them, like 31.8, 60 mm and 6°.
  2. Measure the bar with callipers right next to the stem clamp, where it's widest.
  3. Measure the stem length from the middle of the steerer to the middle of the bar, not end to end.
  4. Check the steerer size too. 28.6 mm (1 1/8") is by far the most common. That's guide 2.01.

Handlebar clamp sizes

Bar clamp (mm)You'll often find it on
22.2BMX
25.4Older mountain bikes and many Japanese road bars
26.0Older road bars
31.8Most road, gravel and mountain bikes
35Many newer mountain bikes

Which shims work

StemBar or steererWorks?
31.8 stem25.4 or 26.0 barYes, with a shim
35 stem31.8 barYes, with a shim
31.8 stem35 barNo
28.6 steerer clamp25.4 steererYes, with a shim

Tools

  • Vernier or digital callipers
  • Torque wrench
  • Carbon assembly paste for carbon parts

Things that catch people out

  • A 35 bar only fits a 35 stem. There's no shim to make it smaller.
  • 25.4 and 26.0 look the same. Measure, don't guess. A 26.0 bar won't clamp safely in a 25.4 stem.
  • Keep the faceplate gaps even, top and bottom, and tighten the bolts a little at a time.
  • Carbon bars need paste and a torque wrench. Grease lets them slip, and too much force cracks them.
  • Stem length is centre to centre. Measuring the outside makes a stem look longer than it is.

From the workshop

Stem length changes how a bike feels more than almost anything else. 10 mm is enough to notice. If you're not sure what you need, bring the bike in and we'll talk it through.

Michael

Book it in

Stems in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Wikipedia's stem article (from Sheldon Brown) and stem makers' published sizes.

BookMy Shed