Frames 1.05
Seatposts and seat clamps
Seatposts look simple, but a tenth of a millimetre decides whether one fits, and the seat clamp is a different size again. This is a straightforward guide to help lift the mystery: how to find your post size, which clamp you need, and how far the post has to go into the frame.
Get the printable PDFThree kinds of post
Inline
The saddle clamp sits straight over the post. Puts you further forward.
Setback
The clamp sits behind the post, so the saddle can go further back. Setback is measured in millimetres.
Dropper
Goes up and down from a lever on the bars. Needs more room inside the frame than a rigid post.
Which one have I got?
- Look at the old post. The size is usually stamped near the bottom, close to the minimum insert line. Or check the bike's original spec on the maker's website.
- Measure the post with callipers, not the frame. Measure in two or three places and match it to the nearest size in the table over the page.
- For a seat clamp, measure the outside of the seat tube at the top, where the clamp sits. That's the clamp size, not the post size.
- For a dropper, measure the room inside the frame. Check how far a post can go in before it hits a bend, bottle bolt or bearing, and the height from the top of the seat tube to the saddle rails when it's set for you.
Common seatpost sizes
| Post size (mm) | You'll often find it on |
|---|---|
| 25.4 | Older and kids' bikes |
| 26.8, 27.0 | Older alloy and steel bikes |
| 27.2 | Most steel, titanium and road bikes |
| 30.9 | Many mountain bikes |
| 31.6 | Many mountain and gravel bikes |
| 34.9 | Newer mountain bikes with long droppers |
Seat clamp sizes
Measure the outside of the seat tube at the top and pick the clamp that matches. These are the sizes Hope makes.
| Clamp sizes (mm) | |
|---|---|
| 28.6 | 34.9 |
| 30.0 | 36.4 |
| 31.8 | 38.5 |
| 39.7 |
Tools
- Vernier or digital callipers
- Torque wrench
- Carbon assembly paste for carbon parts
- Grease for metal posts in metal frames
- Tape measure
Things that catch people out
- The clamp size isn't the post size. A 27.2 post can need a 28.6, 30.0, 31.8 or 34.9 clamp, depending on the frame.
- Never ride with the minimum insert line showing. It can crack the frame or snap the post. Some frame makers want the post deeper still.
- A tenth of a millimetre matters. A 27.0 post in a 27.2 frame will slip and creak. A 31.6 won't go in a 30.9 frame at all.
- Carbon needs carbon paste and a torque wrench. Grease lets it slip, and too much clamp force cracks it.
- A dropper's travel isn't the only number. The whole post has to fit inside the frame at your saddle height. A shorter travel may fit where a longer one won't.
From the workshop
If your post keeps slipping, don't just tighten the clamp harder. That's how seat tubes and carbon posts crack. Clean the post and the inside of the frame, use the right paste, and set it with a torque wrench. If it still slips, bring it in and we'll take a look.
Michael
Book it inSeatposts in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Sheldon Brown and Hope published sizes.
