Frames 1.02
Measuring for a headset
Guide 1.01 explains the headset codes. This one is how to measure your bike so you know which code it takes. You need a pair of callipers, the fork out, and the old cups and bearings out of the frame.
Get the printable PDFThree things to measure
Head tube bore
Top and bottom, right at the edge. Deeper in, an angled bearing seat gives a false reading.
Steerer
At the top and just above the crown. Same both ends is straight, wider at the bottom is tapered.
Crown race seat
39.8 mm on a 1.5" tapered fork, 30.0 mm on 1 1/8". A reducer race fits a tapered fork to a smaller bottom cup.
Measuring, step by step
- Check your bike's original spec first. Many makers list the headset code. Then measure anyway, in case it's been changed.
- Take the fork out and the cups and bearings out. Note which way round everything came out.
- Measure the bore at the top and bottom with the inside jaws, across the widest point, at the very edge. Turn the callipers and measure twice.
- Measure the steerer and crown race seat with the outside jaws, and match the readings to the table over the page.
What your callipers will read
| Code | Bore in the frame | Code | Bore in the frame |
|---|---|---|---|
| EC34 | 33.80-33.95 | IS41 | 41.10-41.20 |
| ZS44 | 43.90-43.95 | IS42 | 41.95-42.05 |
| ZS49 | 49.57-49.65 | IS52 | 52.10-52.15 |
| ZS56 | 55.90-55.95 |
In mm, the same figures as guide 1.01. The number in the code is rounded, so a ZS44 frame measures just under 44.
Steerer
| Reading | Means |
|---|---|
| 28.6 | 1 1/8" top |
| 31.8 | 1 1/4" (rare) |
| 38.1 | 1.5" bottom |
| 39.8 seat | 1.5" crown race |
| 30.0 seat | 1 1/8" crown race |
Tools
- Vernier or digital callipers
- Cup remover
- Crown race remover
- Rag and degreaser
Things that catch people out
- IS41 and IS42 are 1 mm apart. Measure carefully and check the bearing angle too: 36° or 45°.
- Paint and dirt change the reading. Clean the bore first and measure bare metal.
- Some frames use their own sizes. If nothing matches, check with the frame maker or ask us.
- The crown race seat isn't the steerer size. A 1.5" steerer has a 39.8 seat, code 40.
From the workshop
Take a photo of the old headset parts before they go in the bin; the bearing usually has its size printed on it. If you're not sure, bring the frame and fork in and I'll measure them for you.
Michael
Book it inHeadsets in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Park Tool and Cane Creek published sizes.

