Skip to content

Frames 1.04

Matching cranks to a bottom bracket

A bottom bracket has to fit two things: the shell in your frame and the spindle on your cranks. This is a straightforward guide to help lift the mystery: which crank spindle you have, and which bottom brackets are made for it.

Get the printable PDF
22 GXP left end 24 Shimano, GXP 29 SRAM DUB 30 30 mm cranks Spindle ends, to scale (mm) GXP steps down on the left 22 mm bearing 24 mm bearing Non-drive side Drive side
Spindle ends drawn to scale, and a GXP spindle side on. Sizes in millimetres.

Three kinds of spindle

Square taper

The spindle is part of the bottom bracket and the cranks push onto a tapered square. Older and budget bikes, track bikes.

Straight

The spindle is part of the crank, the same size all the way. Shimano 24 mm, SRAM DUB and 30 mm.

Stepped (GXP)

SRAM's GXP is 24 mm, stepping down to 22 mm at the left end, with a smaller left bearing.

Which one have I got?

  1. Find the crank model. It's usually printed on the inside of the crank arm. Look it up on the maker's website for the spindle size.
  2. Or measure the spindle with callipers, with the cranks out. Check both ends: if one end is smaller, it's GXP.
  3. Find your shell. Threaded or press-fit, and how wide. That's guide 1.03.
  4. Choose a bottom bracket made for both, for example BSA 73 for a 24 mm spindle. Fit the spacers the bottom bracket maker says for your shell width.

Crank spindles

SpindleSize (mm)You'll often find it on
Shimano Hollowtech II24Shimano road and mountain cranks, and many others
SRAM GXP24, 22 at the left endOlder SRAM and Truvativ cranks
SRAM DUB29Newer SRAM cranks
30 mm30Many aftermarket road and mountain cranks
Square taper (JIS or ISO)tapered squareOlder and budget bikes, track bikes

Which shells they go in

ShellBottom brackets made for
BSA threaded24, GXP, 30
T47 threaded24, GXP, 30
BB86 / BB9224, GXP, DUB, 30
BB3024, GXP, 30
PF3024, GXP, DUB, 30

From Wheels Manufacturing's range. Other makers may make more.

Tools

  • Vernier or digital callipers
  • Bottom bracket tool to fit your cups
  • Crank tool or Allen key to fit your cranks
  • Torque wrench

Things that catch people out

  • GXP spacers go on the drive side only. Nothing goes between the left bearing and the left crank arm.
  • JIS and ISO square taper look the same. An ISO crank on a JIS spindle sits about 4.5 mm further out.
  • Spacers are there to take out play. Too many and the bearings bind. Follow the bottom bracket maker's chart.
  • Not every 24 mm spindle is the same. Some FSA spindles measure up to 24.07 mm and are too tight for some 24 mm bearings.
  • A bigger shell can take a smaller spindle, with the right bottom bracket. It doesn't work the other way round.

From the workshop

Send us your crank model and your frame, or the bike's make, model and year, and we'll find a bottom bracket that fits both. It saves buying the wrong one.

Michael

Book it in

Bottom brackets in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Wheels Manufacturing's bottom bracket and spindle pages and Sheldon Brown.

BookMy Shed