Brakes 6.01
Disc brake mounts and rotors
Disc brakes come with three kinds of mount, several rotor sizes and a box of adaptors, and they all have to line up. This is a straightforward guide to help lift the mystery: which mount you have, what size rotor it takes, and how to go bigger.
Get the printable PDFThe three mounts
IS mount
Two holes, bolts go across. Older frames and forks. Post mount calipers need an adaptor.
Post mount
Two threaded posts, bolts go straight in. Most mountain bikes.
Flat mount
The caliper sits flat, bolted from underneath. Most disc road and gravel bikes.
Which one have I got?
- Check your bike's original spec on the maker's website. It should give the mount and the rotor sizes front and back.
- Look at how the caliper is bolted on. Match it to one of the three mounts above.
- Read the rotor. The size is often printed on it, or measure across the outside.
- Find the native size for your frame and fork. That's the rotor the mount takes with no adaptor, and the smallest it can take.
Rotor sizes
| Rotor (mm) | You'll often find it on |
|---|---|
| 140 | Disc road and gravel, mostly at the back |
| 160 | Road and gravel fronts, cross-country, many rears |
| 180 | Trail and touring bikes |
| 200, 203 | Enduro, e-bikes, loaded touring |
| 220 | Downhill and heavy e-bikes |
Adaptors
| Native | Adaptor | Rotor |
|---|---|---|
| 140 | none | 140 |
| 140 | +20 | 160 |
| 160 | +20 | 180 |
| 160 | +40 | 200 |
Tools
- Torx T25 for 6-bolt rotors
- Centerlock lockring tool
- Torque wrench
- Callipers to check rotor thickness
Things that catch people out
- You can't go smaller than native. A 140 rotor won't work on a 160 mount.
- Check the maximum rotor size. Frames and forks have a biggest rotor they're made for.
- 6-bolt and Centerlock rotors don't swap, but an adaptor lets a 6-bolt rotor go on a Centerlock hub.
- Rotors wear out. Most makers want them replaced at about 1.5 mm thick. Check the figure on the rotor.
- Front and back can differ. A bigger rotor at the front is common, because it does most of the braking.
From the workshop
Going up a rotor size is one of the cheapest ways to get more stopping power, especially on a loaded bike or an e-bike. Check your frame and fork maker's biggest rotor first. Then it's usually just a rotor and an adaptor.
Michael
Book it inRotors in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Wikipedia's bicycle brake article, Sheldon Brown, and Wolf Tooth and SJS adaptor specs.
