Lights and e-bikes 11.03
Charging from a dynamo
A USB charger turns your dynamo hub into a power socket, so your GPS, phone and lights keep going on a long trip. How much you get depends on how fast you ride, so here's kLite's own chart, the chargers, and the way to get the most out of them.
Get the printable PDFThe chargers

Micro, USB A
A tiny charger on its own lead or a loom. Zip-ties to the frame or fork, or sits in a bag.

Micro-D, USB C
Charger and loom in one, with a soft switch on the bar. Up to 1400 mA.

Dual USB Y cable
Two sockets from one charger: a QUBE rear light in one, a power bank in the other.
Getting the most from it
- Charge a power bank while you ride, not your phone. Phones stop and start as your speed changes; a power bank takes whatever comes.
- Then charge your phone and GPS from the power bank at night, or when you stop for a break.
- Charge on the flat and the descents. Below about 10 km/h there's nothing to spare, so slow climbs don't count.
- Check your own day with the dynamo calculator at traversbikes.com/dynamo-calculator before you go.
What the Micro gives at each speed
kLite's own figures, on a 700c wheel. Smaller wheels spin the hub faster, so they give a little more at the same speed.
| km/h | mph | mA at 5 V | Watts | An hour fills |
|---|---|---|---|---|
| 10 | 6 | 90 | 0.45 | Barely anything |
| 15 | 9 | 300 | 1.5 | About a quarter of a GPS |
| 20 | 12 | 590 | 3.0 | About half a GPS, or 1/7 of a phone |
| 25 | 16 | 750 | 3.75 | Over half a GPS |
| 30 | 19 | 900 | 4.5 | Two thirds of a GPS, or 1/4 of a phone |
| 40 | 25 | 1150 | 5.75 | Over a quarter of a phone |
GPS taken as 1500 mAh and phone as 4500 mAh, allowing for charging losses. Rough guides only.
kLite chargers
| Charger | Socket |
|---|---|
| Micro | USB A or USB C |
| Micro, round | USB A (last stock) |
| Micro-D | USB C, loom built in |
Tools
- A short USB cable for each device
- A power bank (cache battery)
- Zip ties, or a top tube bag for the charger
Things that catch people out
- Not for SON 29S hubs. They put out twice the voltage for the speed and can overload kLite chargers on fast descents.
- The light comes first. With a lights or charge loom nothing reaches USB while the light is on; with USB always on, USB gets what's left.
- Some phones won't charge at low current. They show charging, then stop. A power bank in between fixes it.
- Keep your phone's socket dry. Run the cable into a bag, and let a wet phone dry before you plug it in.
From the workshop
The simplest way on a long trip is to charge a small power bank on the bike all day, then charge everything else from it in the tent. It works whatever speed you're riding, and your phone isn't being stopped and started all day.
Michael
Book it inUSB chargers in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against kLite's Micro charger output chart and product listings.

