Skip to content

Gears and drivetrain 5.02

Cassettes

The cassette is the stack of cogs on your back wheel. It has to match three things: how many gears your shifter has, the freehub on your wheel, and the range your derailleur can handle. Here's what the numbers mean and how to choose one.

Get the printable PDF
CASSETTE ON THE FREEHUB, CUT12 COGS: 10-52BIGGEST COGthe easiest gearSMALLEST COGthe hardest gearLOCKRINGabout 40 Nm, check the makerONE COG, END ON34TSPLINESmust match your freehubTRAVERSCanewdon, Essextraversbikes.comCASSETTESGUIDE 5.02 · SIZES IN MM · NOT TO SCALE
A 12-speed cassette on its freehub, cut in half, and one cog end on. Drawing not to scale.

How they're made

COGS AND SPACERS

Cogs and spacers

Separate cogs with spacers between. Cheaper, heavier, and common on road and older bikes.

BIG COGS ON A SPIDER

Cogs on a spider

The big cogs are fixed to an alloy carrier to save weight. Most mid-range mountain bike cassettes.

MACHINED IN ONE PIECE

One piece

Machined from one block of steel, with the biggest cogs added. Light and stiff, and dear.

Choosing a cassette

  1. Check your bike's original spec for the speeds and the range, like 12-speed 10-51.
  2. Check the freehub on your wheel. HG, Micro Spline, XD or XDR. Guide 3.03 shows how to tell.
  3. Check your derailleur's biggest cog. A bigger cassette than the mech allows won't shift.
  4. Choose the range for your riding. Bigger biggest cog for climbing, smaller steps for the road. Our gear calculator helps.

Reading the numbers

WrittenMeansTypical bike
11-28, 11 speed11 cogs, smallest 11 teeth, biggest 28Road
11-34, 11 speedA wider range for hillsEndurance road, gravel
10-44, 12 speedWide, small stepsGravel 1x
10-52, 12 speedVery wide, for 1x mountain bikesMTB

Replace it when

SignMeans
New chain skipsCassette worn
Hooked teethWorn
Every 2 to 3 chainsIf chains are changed in time

Tools

  • Cassette lockring tool to suit
  • Chain whip
  • Torque wrench
  • Grease for the lockring thread

Things that catch people out

  • Changing the chain late wears the cassette. Then a new chain skips on the old cassette and you need both.
  • Shimano 12-speed MTB needs Micro Spline, SRAM 10T cassettes need XD. Check before you buy.
  • Some cassettes need a spacer behind them on certain freehubs. It's in the cassette's instructions.
  • The lockring is torqued, not just tight. About 40 Nm on most; check the number on the lockring.

From the workshop

If you change your chain before it wears past the limit, a cassette lasts two or three chains. Leave it and you'll be buying both. Garbaruk cassettes are in the shop if you want a lighter one or a bigger range.

Michael

Book it in

Cassettes in the shop

See them all

Not sure which fits? Send us your bike's make, model and year and we'll tell you.

Get the printable PDF

The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.

We'll email you a link. It unlocks every guide on that device.

Already unlocked on this device? Download the PDF

This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 17/11/2026 against Shimano, SRAM and Garbaruk cassette specs.

BookMy Shed