Frames 1.03
Bottom brackets explained
Bottom brackets come in more sizes than almost any other part, and the names don't help. This is a straightforward guide to help lift the mystery: whether your frame is threaded or press-fit, how wide the shell is, and how big the hole is, so you can work out which bottom bracket fits.
Get the printable PDFThe three types
Threaded
The cups screw into a threaded shell. BSA, Italian and T47. The easiest to service.
Press-fit cups
Cups with the bearings in are pressed into a smooth shell. BB86, BB92, PF30 and BB386EVO.
Bearings straight in
No cups. The bearings press straight into the frame, often held by clips. BB30, Trek BB90 and BB95.
Which one have I got?
- Check your bike's original spec. Look up your model and year on the bike maker's website, or check the spec sheet or receipt from when it was bought. Look for a line like "BB: BSA 73" or "PF30".
- Take the cranks and bottom bracket out and look inside the shell. Threads mean BSA, Italian or T47. A smooth hole means press-fit or bearings straight in.
- Measure the shell width across the two outside faces of the frame, with the bottom bracket out. Common widths are 68, 73, 86.5 and 92.
- Measure inside the shell with callipers. Then match the width and the hole to the tables over the page.
Threaded shells
| Name | Thread | Hole | Shell width | Drive side thread |
|---|---|---|---|---|
| BSA (English) | 1.37" × 24 TPI | about 34 | 68, 73, 83, 100 | Left-hand |
| Italian | 36 mm × 24 TPI | about 36 | 70 | Right-hand |
| T47 | M47 × 1 mm | about 46 | 68, 73, 83, 100, 86.5 | Left-hand |
In mm. Road bikes are usually 68 wide, mountain bikes 73. T47 at 86.5 has its cups inside the shell.
Press-fit and bearings straight in
| Name | Hole | Shell width | Bearings |
|---|---|---|---|
| BB86 / BB92 (Shimano, also PF41) | 41 | 86.5 road, 89.5 or 92 MTB | In cups |
| BB30 | 42 | 68 road, 73 MTB | Straight in, with clips |
| PF30 | 46 | 68 road, 73 MTB | In cups |
| BB386EVO | 46 | 86.5 | In cups |
| BBright (Cervélo) | 46 | 79 | In cups, shell wider on the left |
| BB90 / BB95 (Trek) | 37 | 90.5 / 95.5 | Straight in |
In mm. A few brands have their own sizes. If yours doesn't match, check with the bike maker.
Things that catch people out
- BSA and T47 undo the wrong way on the drive side. The chainring side has a left-hand thread, so it undoes clockwise. Italian is right-hand on both sides.
- BB30 and PF30 sound alike but aren't. BB30 is a 42 mm hole with the bearings straight in. PF30 is a 46 mm hole with cups.
- T47 and PF30 both measure about 46 mm. Look for threads before you order.
- Measure the frame, not the old bottom bracket. Spacers and cup lips change the width you see.
- The shell is only half of it. The crank axle has to match the bottom bracket too. That's guide 1.04.
Tools
- Vernier or digital callipers
- Bottom bracket tool to fit your cups
- Bearing press and cup remover (press-fit)
- Torque wrench
From the workshop
A creaking bottom bracket is one of the most common jobs we see. Often it isn't the bottom bracket at all but a pedal, chainring bolt or seatpost, so check those first. If it is the bottom bracket, bring it in and we'll find out what's causing it.
Michael
Book it inBottom brackets in the shop
See them allNot sure which fits? Send us your bike's make, model and year and we'll tell you.
Get the printable PDF
The same guide on two A4 pages, to print for the workshop or keep on your phone. Leave your email and we'll send the link. It unlocks every guide in the library on that device.
Already unlocked on this device? Download the PDF
This guide is general advice for home mechanics. Bikes and parts vary, so always follow the maker's instructions and torque settings for your parts. If you're not sure, or the job needs tools you don't have, ask a qualified mechanic. Travers Bikes can't be responsible for work you carry out yourself. Nothing here affects your legal rights. Sizes checked 16/11/2026 against Wheels Manufacturing's bottom bracket chart, Sheldon Brown and Wikipedia.

