Bespoke titanium frames
Design your own frame
Pick a frame, change what you like and watch the drawing change to scale, then send it to us for a quote. Designed with you in Essex, made in titanium to your drawing, then inspected, checked and cleaned by us. How bespoke frames work · What to measure
Watch the two minute tour
Not sure where to start? Pick an idea, then change anything you like.
£2,199 inc VAT, free UK delivery · standard
SendSend the standard frameSettings
Size shown: Large. Move a setting and the drawing changes; the wheels stay on the ground. The faint dashed frame is the standard.
Standard 475mm, range 430 to 520.
Standard 652.2mm.
Standard 639mm, range 594 to 684.
Standard 112.1mm.
Standard 470mm, range 390 to 530.
- Wheelbase
- 1210 mm
- Trail
- 126 mm
- BB height
- 316 mm
- Standover (about)
- 783 mm
- Seatpost to bars (horizontal)
- 725 mm
- Reach to the bar clamp
- 553 mm
- Bar clamp height
- 1026 mm
- Rear tyre to seat tube
- 26.6 mm
- Front tyre to down tube
- 52 mm
- Front tyre to fork crown
- 89 mm
- Heel clearance
- 13.3 mm
- Largest chainring that fits
- 36 teeth
- Front centre
- 761 mm
- Wheels
- 32" x 2.4" (822 mm)
These drawings and warnings are a guide only. We check every design and confirm the final measurements and fit with you before anything is built.
How accurate is this?
The drawing uses the real tube sizes and tyre, so tight gaps show up. We check the heel and chainring clearances again when we check your design. Standover is approximate. The stem, bars and saddle are shown to help you see your reach.
Save and share
Your design is saved in the link, so you can come back to it, send it to a friend, or post it. Nothing is stored on our side unless you ask for the reminder below.