The question I get asked most about the kLite USB charger is "Which cache battery works best with it?" There are quite a few to choose from but I have had the best result from the Mi Powerbank Pro 1000 mAh.
It has low power charging, ideal for trickle charges even when you are climbing. Many cache battery wont do this. Its nice and slim, so will easily slide into a top tube bag. It also has dual USB output, so you can charge a number of things at night as you sleep or run the Klite main light at full power while you continue to ride without needing to worry your phone/Garmin is going to die.
0 Comments
Its always great to feedback from customers. Especially with another 5 star review for the kLite Bikepacker Pro
looking for a easy way to use kLite QUBE???
its USB powered....so any USB AA Battery Emergency Charger, will work. cheap ones are £2-5 https://www.ebay.com.au/i/263418387407?chn=ps just load with AA battery's and turn on....this is the cheapest way to run the QUBE, if you don't have a dynamo hub you could use any battery with a small USB power step down module if you can DIY these cache battery banks offer LOW POWER mode. https://www.mi.com/global/pb10000pro/ http://www.en.cinq5.de/stromversorgung/smart-power-pack-ii/ or just hook direct to any dynamo powered USB charger, like kLite dual USB output charger. we could also add onboard ANY BATTERY VOLTAGE adapters if need....this way they will also work form 9v battery or even E-BIKE battery. Happy to answer power questions on this post. kLite Qube FLASHING front & rear safety light
USB powered kLite Qube FLASHING rear safety light ULTRA low power drain, will not affect light or USB recharge use at same time Anti - GLARE optics, rider directly sitting on your wheel is not blinded, but car at distance gets full blast 100% waterproof / Dunk proof Compact and tiny size Seat post or seat stay mounting Geared Up - Long term test on the kLite Bikepacker ULTRA MTB/SNOW and GRAVEL
JeffsBikeBlog - First Impressions, kLite Bikepacker ULTRA MTB/SNOW, GRAVEL and USB Charger BearBonesBikePacking - Long term kLite Bikepacker Pro V2 BearBonesBikePacking - kLite Bikepacker ULTRA MTB/SNOW review BikePacking.com - kLite Bikepacker ULTRA MTB/SNOW and GRAVEL BikePacking.com - kLite Bikepacker Pro V1 review Singletracks.com - kLite Bikepacker Pro V1 review AdventureCycling - kLite Bikepacker Pro V1 review TourInTune.com - kLite Bikepacker Pro V1 review TO GET THE POWER FROM THE DYNAMO TO THE KLITE/USB CHARGER
You have 3 options (all 3 are plug and play) Option 1 kLite Single Lead - This is great if you want to keep it really simple, its a cable that runs directly from the hub to the kLite light or USB charger - just pull it out and plug it back in to swap between the 2 Option 2 kLite Simple Bar Switch - If you want to flip between the kLite Light and USB power this is your best option. The Bar switch has 2 extra option - you can choose either Dual or Lights/USB. **DUAL USE** USB always ON is made to run the USB module in the day and night...this way you can hook up the new kLite rear Qube flashing light. Main SWITCH now just turns the front light ON/OFF. (As of 27/11/18 the Qube is in V2 or prototype and is expected to be on sale in the New Year) **LIGHTS OR USB CHARGE** is the regular setup...lights in the night, charge in the day...for a easy setup that is fully auto with the touch of just one switch. Option 3 kLite Simple Top Cap Switch - If you to flip between the kLite Light and USB power less often - say when it gets dark, this is your best option as you can do it whilst still moving but leaves your handlebars less cluttered. NOW JUST CHOOSE A KLITE LIGHT kLite Light options kLite Bikepacker Pro V2 - Compact and aero kLite Bikepacker ULTRA - Road/Gravel - Focused beam in single unit kLite Bikepacker ULTRA - MTB/Snow- Spread beam in single unit KLITE USB CHARGER Almost done - To power your Phone, Garmin backup cache battery you will need the kLite USB Charger You can choose between the Dual and Single Output kLite Single Output - Plug in your USB device (phone/Garmin) and charge while you ride. kLite Dual Output - Plug in your USB device and charge your rear light at the same time. THINGS TO CONSIDER A dynamo can only output so much power, consider the Trip/Adventure/Race you are planning to use the setup for. If you are doing lots of long slow climbs in the mountains or especially offroad (below about 9kph) then trying to power your kLite Light and USB rear light might not work, consider charging a backup battery during the day and then use this to charge your rear light/phone when it gets dark and you switch to the kLite Light. K-lite Bikepacker Ultra - if it ain't broke fix it anyway.
I tested the K-lite Bikepacker Pro dynamo light some time ago. I was impressed, it was and I believe, still is the brightest dynamo light in the world but time marches on and things change. The Bikepacker Pro has a new stable mate who shares the title of 'the brightest dynamo light in the world' ... it's called the Bikepacker Ultra. K-Lite Ultra, a very different looking light to the Pro. Thing is, outright lumens aren't the be all and end all when it comes to lights. Other factors come into play and even the potentially brightest of lights will be an underwhelming disappointment if that potential isn't properly utilised. In the bike light arms race it's something which is all too often ignored and attention directed instead toward a headline grabbing max lumens figure. Fortunately, after my time with the Bikepacking Pro, I think it's something Kerry from K-lite understands completely. I've known for a while that Kerry had ideas and features he wanted to incorporate into a new light but given how good the Pro is, what could he do to make the Ultra better, after all they both produce 1300lm? What happens where and when. It's quite obvious that the Ultra isn't simply an updated or upgraded version of what went before. It looks very different because it is very different. Firstly, the single lens has been replaced by three. The two outside ones come on first and I should say that they come on almost as soon as the wheel is spinning with virtually no lag or delay. The one in the middle lights up as speed increases, think of it as a kind of automatic high beam. You'll notice that the centre lens isn't like the others and that's because it produces a longer reaching, tightly focused beam whereas the outers are much more 'floody'. The aluminium housing has gone, replaced with nylon. It's tough stuff and should remain chip, dent and scratch free for a very long time. Kerry tells me that it's also allowed the light to be built 'inside out' with a semi external heatsink and is now fully potted internally. For us, that means increased vibration and water resistance which of course equals longevity; it may not look quite as pretty as machined anodised aluminium but it's a far more practical choice long-term. Something you probably won't notice is that the separate 'control box' of the Pro is now integrated into the main light unit. It does simplify things and for anyone who simply wants their dynamo to power a light rather than supply charging power, it makes the Ultra truly 'plug and play'. It's bigger than the Pro but there's no separate control box ... weight as pictured is 169g on my scales. You may have spotted the small 'lenses' on each side of the light? Well, these are Kerry's way of trying to keep us all that little bit safer out there while on the roads. Each lights up as the outer emitters do, they're surprisingly bright and add some very welcome 'be seen' rather than 'see by' illumination for anyone who might be approaching from the side. You don't really notice them when you're riding but drivers seem to. When it comes to mounting, versatility is very much the name of the game. The light comes fitted with a forked mount which is attached to the aluminium heat sink, you then bolt another forked mount of your choice to it and fasten that to the bars or whatever by way of small cable-ties. There's a range of mounts available, so while it may sound a little complicated it allows you to mount the light directly without the need of tape or bits of rubber to pack out the bars. You can also mount the light either way up without effecting the optics; no matter what weird and wonderful bars you're using or how your luggage is placed, you should be able to locate the light with no compromises. It's very adaptable and you can mount it either way up if that helps. I did wonder whether the larger and obviously heavier light might try and turn on the bars in use but that thought has proved to be completely unfounded. In fact, it doesn't try to turn or rotate at all and once fitted, it stays exactly where you put it ... granted, the mount isn't quick release but it's secure and completely wobble free which seems like a good trade off to me. Okay then, I know what your thinking ... yeah, yeah, that's all well and good but just how bright is it? Firstly, let me just remind you that a dynamo light is a different beast to a battery powered light. There isn't a constant and steady source of power; a dynamo light has to contend with differing power levels from virtually nothing to lots and it needs to produce useable light at all points in between. Most dynamo lights have an in-built capacitor who's purpose is to store a certain amount of electricity when the going's good and then release it when there's little or no output from the dynamo ... pushing up a steep hill, waiting at a junction, etc and the Ultra is no different but at times like this, all dynamo lights will appear somewhat dim when compared to battery powered ones. This is you stopped ... maybe you're eating a pie or something? At a standstill the Ultra still provides some useable light via it's capacitor / stand-light. The capacitor will provide the required power for quite a while but not indefinitely and over a period of around 20 minutes or so the light will gradually dim unless there's additional input from the dynamo. At low speeds, you will be literally over-shadowed by anyone following with a modern battery powered light but (a) that's just part and parcel of dynamo lights and (b) can be largely overcome with the use of an additional headlight kept in reserve and utilised if or when it's required. This is you around 18km/h ... obviously going well after your pie. As things start to speed up and dynamo output increases a quite dramatic change takes place as the full potential of the light is unleashed on the unsuspecting trail ahead. The two outside emitters provide a very wide spread of light that really helps to highlight the edge of the trail, while the centre one throws its beam way out in front to illuminate the trail ahead. They actually merge very well with no step or noticeable gap between the two, leaving you with a deep pool of quite natural looking light to bathe in. For anyone wishing to use their dynamo to supply both charge and to power lights, you can set the Ultra up with a K-lite bar switch. It can be mounted pretty much anywhere and allows you to switch between lights and charging without plugging / unplugging any wires. You might also be interested to know (I was) that K-lite also now produce their own USB charging / regulator unit and it addresses some issues that can arise when charging iphone, Samsung and Garmin ... those who've gone down this road already will likely know what I'm talking about here. Finally, if you're not much of a mountain biker and prefer to cycle on smoother surfaces, the Ultra is available as a road / gravel biased model. It shares the same features as this one except the optics are reversed meaning you get a longer, more penetrative beam early on with the broader floody beam appearing as speed increases. I've not tried one but Kerry tells me that although both models have the same 1300lm output, the road version appears brighter at lower speeds. Apparently, it's all to do with the Lux or 'throw' and how our eyes see light ... but that's probably a subject for another day. If you're in the market for a dynamo powered light with genuine off-road capability, that's largely idiot, crash and waterproof, I doubt there's anything better. K-Lite is available in the UK from the lovely folk at Travers Bikes and a Bikepacker Ultra will cost you £219 at this moment in time.Thanks to Bearbones Bikepacking for the review of the kLite Bikepacker ULTRA In Stock!
The new kLite Bikepacker Ultra Road/Gravel and MTB plus the stealthy Bikepacker Pro V2 are all ready to ship. The pre-ordered Road/Gravel Ultras are all on their way to customers! A Few Questions I get asked about kLite Products Whats the Difference between the Bikepacker Ultra Road/Gravel and the MTB version? There is only one difference: The Road/Gravel Light has 2 main beams and 1 Spread beam. The MTB Light has 1 Main beam and 2 Spread beams. Is the Road/Gravel Light legal on the Roads? Yes everywhere in the worlds except Germany. Why buy a Bikepacker Pro V2 now the Ultra is out? Both the Pro V2 and Ultra produce the same amount of lumens 1300, the main difference is the Pro V2 is much more compact, the standby battery is external of the light meaning you can tuck it under the stem etc when space is tight or you want a more aero cockpit. The Ultra has the standby battery built into the main head unit. Does the kLite work straight out of the box? It depends on the setup you already have, you will obviously need a dynamo to power the light, you will also need a way to connect the kLite to the dynamo, you do this via either of the kLite Switches Handlebar or Topcap. Can I run a kLite upside down? Yes, no problem, the beam pattern is the same either way up. Is the kLite really Plug and Play? with other Dynamos I needed to Solder and heat shrink the cables Yes, Plug the switch directly into the hub, the cable comes pre-fitted with either SON or SP/Shimano connections. Plug the Switch directly into the kLite Ultra or Pro V2. The kLite USB Charger is also the same, the Plug is already fitted, simply plug this straight into the kLite switch. |
TRAVERS BIKES
HAND BUILT TITANIUM FRAMES. Archives
March 2024
Categories
All
|